put on 300ex shock

[BlasterEaten250]

Just got my rear shock on. It wasn't to hard after we found out what size washers we needed. I haven't been able to test it to much yet, because I can't go off of jumps (snow) But from what I can tell by just riding around is that it soaks up bumps a LOT better, and the whole quad is more stable. It lowers the ride hieght by about 2 inches on the softest preload setting. If you guys have any questions on installation just ask here.

Here is my old shock on the quad

[BlasterEaten250]

Here is the new shock on the quad

[BlasterEaten250]

Close up of the bottom mount. I had to put a couple small washers on each side, same with the top. I also had to drill the shock mounts slightly larger. I went from a 10 mm bolt to a 12 mm bolt. Thats about all the changes I had to make.

[BlasterEaten250]

Here is the old shock off the quad

[BlasterEaten250]

Here is the new shock off the quad. It's off an '07 300ex. You can tell it was BARELY used. I got it for 85 bucks off of ebay.

[BlasterEaten250]

Another view of the 300ex shock. It makes the 250 handle better too because it lowers the back end slightly.

Thats all the pictures I have, if you have any questions or requests for certain angles of pictures, just ask.

[SGARCIA89LX]

thanks for the info.future upgrade :D

[250ex13]

Do you plan on doing the front end also?

[BlasterEaten250]

I might do the front, still haven't decided. People that did do the front shocks said that you should get wheelspacers to go along with it, I don't know if I want to put that much money into it. But I definatly reccomend doing the back!

[BlasterEaten250]

here are some pictures from far away

[BlasterEaten250]

I wish all this snow would melt, so i could actually test this shock

[BlasterEaten250]

thats it

[250exkid]

dang man im liking it! how hard was it to drill it? and would it be easy to screw up?:( :( :confused: :eek:

[Caseys 300ex]

Um your shocks on upside down.

[m.h.s.c.#527]

yea it is

[hillclimbingrec]

are you guys retarded? yes. dude, no it's not, i have it the same way, if you guys dont belive me go look at 300ex's. dumbass's

[Caseys 300ex]

Originally posted by hillclimbingrec
are you guys retarded? yes. dude, no it's not, i have it the same way, if you guys dont belive me go look at 300ex's. dumbass's

Oh ya i forgot that i dont own a 300ex.:rolleyes:

[250exkid]

if you look at the bottom of it its got the tighter wrapped coil so there for he has it right. iv never seen the lossely wrapped on the bottom.... thats just what i have seen!:cool:

[BlasterEaten250]

Thats the way it has to be mounted, it doesn't really matter anyways, it goes strait up and down.

[hillclimbingrec]

lmao!! dude, u have it right, and the dude witht he 300ex, i guess you need to put it back then, cuz yours is wrong

[250exkid]

soo whos right?

[Pipeless416]

Originally posted by 250exkid
soo whos right?

it really doesnt matter either way. the spring is still undergoing the same amount of stress at each part of the coil as it would mounted the other way. you guys all just need to chill and actually think about it. the softer part of the spring will compress first no matter what.:rolleyes:

[250exkid]

lol yea what he said chill!

[Caseys 300ex]

Everybody- On the 300ex that shock would be upside down. The only reason it matters is because mud, water, or dust might get down into the body of the shock Throught the shaft seal.

Hillclimbingrec- You dont have to make an arguement about this all i told the guy is that the shock is upside down. Also i wanted to know how your shock is working for you because in the one that sold it to you. Ive been trying to get ahold of you but ur pm box is full. I hope it all worked out for you with out any troubles.

[hillclimbingrec]

lol, dude, it's friggin AWESOME!!!!!!!!! jumps SOOOO much better, i can go round 6feet high and land flat and not even start to bottom out, it's awesome!! thanks again!!

[Caseys 300ex]

haha, Im glad to hear your happy with it because i have been stressed out about it since the day i sent it off. I was wondering if you could leave me good feedback in the traders feedback section. Thanks

[BlasterEaten250]

Originally posted by Caseys 300ex
Everybody- On the 300ex that shock would be upside down. The only reason it matters is because mud, water, or dust might get down into the body of the shock Throught the shaft seal.
Well I have a shock cover on anyways, so I dont think it will be a problem. But like hillclimbingrec said, its a great mod!

[BlasterEaten250]

Originally posted by 250exkid
dang man im liking it! how hard was it to drill it? and would it be easy to screw up?:( :( :confused: :eek: It's not that hard to do, you have to take off the back plastics to drill the top mount and take off the left rear tire to do the bottom one. The hardest thing was finding the right washers to put on to use as spacers.

[250exkid]

ok but isnt the holes threaded??? tho cuz the stock bolt has no nut?

[BlasterEaten250]

Yes, the holes are threaded. When you drill it out (15/32's size drill bit if i remember right) you put the new bolt in, (has to be smooth where the shock rests on the bolt) and then you can just put a locking washer on along with a nut.

[Caseys 300ex]

Originally posted by BlasterEaten250
Well I have a shock cover on anyways, so I dont think it will be a problem. But like hillclimbingrec said, its a great mod!

Oh alright. i guess it wont matter for you then.

[250exkid]

lol i would hope not................... hmmm ok i wouldnt be upgrading suspension for a wile anyways

[m.h.s.c.#527]

i just put mine on i didnt use washers or n e thing where do i need to put them

[BlasterEaten250]

you should of had too, they go around the eye of the shock. There shouldn't be any side to side play at all, that could screw a number of things up.

[m.h.s.c.#527]

ok how many and what size washers

[oldskoolex400]

just wondering, but if your going to spend the money on front shocks, why cant you use 400ex a arms and shocks if 300ex stuff will fit, i know the 400 stuff will fit 300's though, i havent dealt with any 250ex's tho

could you not run a raptor rear shock on the 250ex also?

[m.h.s.c.#527]

yea a rappy shock willl fit

[BlasterEaten250]

Originally posted by oldskoolex400
just wondering, but if your going to spend the money on front shocks, why cant you use 400ex a arms and shocks if 300ex stuff will fit, i know the 400 stuff will fit 300's though, i havent dealt with any 250ex's tho

could you not run a raptor rear shock on the 250ex also? 300ex front shocks will only fit on recons (somehow the mounts are different) and that's only the shocks, not the a arms. That would be cool though if you could

[oldskoolex400]

any of you have close-up pics of a 250ex front end?

[oldskoolex400]

300ex front shocks will only fit on recons (somehow the mounts are different)

still, cant you fab up some mounts to make the 300ex front shocks fit?, then if you could get that, you could put 400ex shocks on it? w/ a relocator bracket of course. i dunno, im just tryin to help you guys out, i have never owned a 250ex so i dont have much experience with them

[m.h.s.c.#527]

heres my front end these r not 300ex shocks though

[oldskoolex400]

anybody else? i cant really see the top mounts for the rez. and cant see the bottom for the shock, need one that you can get a better look at it

[ryanh250ex]

300ex/400ex a-arms will NOT fit on the 250ex. the mounts for the a-arms are roughly .75" too narrow on the 250 frame.

[oldskoolex400]

the mounts are .75 to narrow or the a arms themselves are to narrow?

[ryanh250ex]

Originally posted by oldskoolex400
the mounts are .75 to narrow or the a arms themselves are to narrow?

the mounts on the frame.

[Kickstarts-suck]

you cant use the raptor rear shock?

[oldskoolex400]

yea, a 01 preferably, but you can use other years with some modifications

[BlasterEaten250]

Originally posted by Kickstarts-suck
you cant use the raptor rear shock? yeah you probably could assuming the springs weren't too wide, but I went with this because it was a killer deal.

[m.h.s.c.#527]

u have to cut into the frame for the piggyback rez on a 3hundred ex so prolly wouldnt be a good idea on a 250

[oldskoolex400]

u have to cut into the frame for the piggyback rez on a 3hundred ex so prolly wouldnt be a good idea on a 250

yes, but i dont see why you couldnt use the 01 rap shock on it

[m.h.s.c.#527]

you can

[oldskoolex400]

you can

lol ok, that is what i said, we will leave it at that

[m.h.s.c.#527]

all i said is it wasnt a good idea 2 use 2002 and up shocks

[BlasterEaten250]

That would be pretty nice to have a raptor shock on it, and if you wanted to take it really far you could have it revalved for the 250's weight. I personally was just looking for something that would get me by for a year or two until I get a 400, and the 300ex shock is doing just that:)

[m.h.s.c.#527]

u mean the 450 lol dont waste ur money on a 400ex

[Pipeless416]

Originally posted by m.h.s.c.#527
u mean the 450 lol dont waste ur money on a 400ex

no, he means he'll take what he can get, which happens to be a 400. not everybody needs a 450 for trails, nor can everybody afford one. hes grateful for what he is given. :rolleyes:

[Kickstarts-suck]

Originally posted by m.h.s.c.#527
u mean the 450 lol dont waste ur money on a 400ex

you wasted your money on a 250ex :chinese:


i would rather have a 400 then a 450

[oldskoolex400]

you wasted your money on a 250ex

exactly, unless you are a youger person that doesnt need something that big at the time (9-13)


i would rather have a 400 then a 450

thats purely your opinion, i respect that, i have/had both and the 400 was a long way from stock, i prefer the 450 now over the 400, not only the power, but tweaking on the suspension on the 450 over the past few months, it handles as good as the 400 now, however i will be looking into revalve/respring soon

m.h.s.c.#527 and Kickstarts-suck, lets keep it on topic here if you guys dont mind

[oldskoolex400]

m.h.s.c.#527 and Kickstarts-suck, lets keep it on topic here if you guys dont mind

[BlasterEaten250]

picture of the shock the other way, if anyones interested i'll tell how to do it, it's very simple