PDA

View Full Version : truck exhaust help



tp300ex
01-23-2007, 08:46 PM
ok so i been looking at these flowmasters and i got some questions????
if i get this wat do i have to do just replace the old one
and do i have to redile it or w.e?

or should i just bring it to a shop and let them do it?

heres wat im looking at

http://www.flowmastermufflers.com/40_super.html

fast250r
01-23-2007, 08:52 PM
Just take yours off and put that one on. No need to do anything else.

tp300ex
01-23-2007, 08:56 PM
ok kool one more thing....i was looking and the only one they had it for was 99-04
i have an 06 should be the same huh?

ilpadrino113
01-24-2007, 08:49 AM
ok kool one more thing....i was looking and the only one they had it for was 99-04


find out the dimensions of the exhaust online, and then just look at your truck and see if it matches up. A little bit longer on the replacement would be fine, you cold always cut the old pipe, but shorter woudl require welding an extention to the pipe. Look at the diameters also

JessetheKid
01-24-2007, 08:53 AM
if your truck is an 06 I would recommend not hacking up ur exhaust and welding just a muffler in. Just get a complete system it will be much more professional and better in the long run.

wishmasstir
01-24-2007, 09:54 AM
you can just add the muffler but most people add a cat back system. i get my exhaust systems custom made so i just order the muffler i want and the tips. i have the flowmaster super 40 series muffler dual inlet/dual outlet and it rumbles. it gets quieter after 2500rpm's on my 350

sly400ex
01-24-2007, 11:13 AM
That sound clip sounds sweet! The engine in the clip has a decent cam though.

K_Fulk
01-24-2007, 11:17 AM
Originally posted by JessetheKid
if your truck is an 06 I would recommend not hacking up ur exhaust and welding just a muffler in. Just get a complete system it will be much more professional and better in the long run.

I agree.

Look at some of the other ones, other than flow masters also. Theres better exhausts out there.