LTR dyno

[05Z400rdr]

anybody have a dyno for the lt-r450 with the following mods or close to the same mods: cherry bomb, lid off, k&n, baffle out....? really wanna see what hp and torque my ltr is puttin out...

[ghott]

42-44hp
29-32tq

My guesstimate :)

[Mobile Dyno]

Mods on this one that I did are:

Yoshi Pipe
Pim Module
Airbox lid off
K&N Filter

[Mobile Dyno]

-1T on front sprocket

[Mobile Dyno]

:D

[Sandgod4]

Originally posted by 05Z400rdr
anybody have a dyno for the lt-r450 with the following mods or close to the same mods: cherry bomb, lid off, k&n, baffle out....? really wanna see what hp and torque my ltr is puttin out...

My bros had those mods except for the K&N. It did 40hp and 27.25tq on KBR's dyno.. His dyno is known to read low or is it others read high. Take your pick..

[05Z400rdr]

alright thanks so much!...so im guessing mine puts out about 44-46 hp and 25-27 ft. lbs?? thanks,

Landon

[cataway]

Mobile Dyno
do you have any other goodies to share ?

[Colby@C&DRacing]

We built a 498 LTR with an ice cube,13.5:1 compression,C&D Racing porting, PSI valve springs, Web +6 cams, polished throttle body, twin air filter no lid and an HMF full system, boss noss controller.

This atv pulled 52.5 on the dyno with stock gearing and 56.5 with nitrous. We need to change some things to get the nitrous working better but it runs pretty good

[dizzled on atk]

whats goin on ? you guys still have any cannondale parts laying around ? let me know thanks, by the way i just got done building my ltr i'm tryin to get it on the dyno this week but it's not looking good to much to do before leaving wensday for oklahoma, but i will post as soon as i get the numbers

[Yee-Haw_400EX]

Originally posted by Colby@C&DRacing
We built a 498 LTR with an ice cube,13.5:1 compression,C&D Racing porting, PSI valve springs, Web +6 cams, polished throttle body, twin air filter no lid and an HMF full system, boss noss controller.

This atv pulled 52.5 on the dyno with stock gearing and 56.5 with nitrous. We need to change some things to get the nitrous working better but it runs pretty good
Thats either a really weak motor or a very conservative dyno.

[dizzled on atk]

i did get my ltr dynoed with stock gearing, a stock bore and stroke but a je piston 13:1, hot cams, airbox mods a stock filter, full yosi rs5 exhaust, powercomander with a custom map and tt 111 race fuel it dynoed 8 concecitive pulls of 51.8hp and for gods sake i can't seem to remember what the exact tourque number was, i was overly excieted with the hp numbers that it didn't stick in my head ! on my way to building another one but going to go a little different route this time !

[RATPACK Z400]

I was talking with a guy that runs/owns titan and hes got a national kit for the LTR450 thats in the 60s with around 40 torque if im not mistaken.look in the ltr450 forum to talk to him or pm him for info.