How big will the difference be?

[rubnmenon]

Hey i just would like to ask all you guys that have these mods:

Full exhaust system
DynoJet Kit
No lid on
686cc wiseco 11:1
Head Ported
Stage 2 camshaft with the spring kit
Froged Rod conecction

How many Hp will my bike have cuz its not ready yet...
Will it be very very fast or how fast could it be with thoese mods?? just so i can have an idea

[250r4life]

my buddy has a set up pretty similar to that which you posted, and his raptor screams...

[rubnmenon]

i cant wait to finish it.....

does he has the stock crank? or stock rod connetion cuz i still dont know if i should change the crank or just the rod

[Glenyzracer25]

i had the same set up until recent when i changed to a 12.5:1. if you can keep the front end down you will be able to dust everything except highly modded 450's and banshee's. i ran an 8.80 at the drag strip and 77mph in an 1/8.

[MXin700R]

Mine is 700cc(103mm bore) and it puts down the #s in my sig on knobbies so with a cam you should be pretty close to that.

[rubnmenon]

i already made a lowering kit so i can hold the front down, its oretty cool, the wheels spin intead of go up

i see u (MXin700R)have a 15 tooth, how many mph do u drive with a 15 tooth?? i already boght a 14 tooth but still not intall it

[MXin700R]

Another 4-5mph on the topend. I just ordered a 36t rear too so lookout lol. Mine makes so much bottom end I needed to go to a 15t front because my 1st gear was pretty much unused. I went to the 15t and love it but Im gettin new tires this week and I went to 18" so Ill have to regear to compensate to try to keep my overall gearing I have now(that I like).

[rubnmenon]

so will my first gear will be very low with the mods im putting on if i have a 14 tooth?? cuz stock is 13 tooth

[MXin700R]

Yes, no doubt go up one tooth on the front sprocket for sure when going to a 11:1 piston....much less the other mods as well. Thats what I did, 14t is stock on the 700s.

[rubnmenon]

oh ok, i´ll see what happends when im done with the motor, if it is to low i´ll go to 15 tooth one more question: do u have an idea how a intake spacer works?

[rubnmenon]

whit all does mods how should my jetting be?im in mexico at 2080-2100 meters