MX Z400 Part Out ELKA-BURGARD-LSR-DYNA-FMF etc.

[z400rider14]

The quad that these parts were removed from, was a very clean and excellent running 2003 Z400. I am parting out everything, including all the stock parts, so if u dont see something, just ask because more than likely i will have it. If you need any more pictures, just send me a message, i will put them up. All prices do not include shipping.

-Motor has less than 70 hours w/ a barnett clutch kit that has around 20 hours on it. I have never had any problems w/ it and I always ran AMSOIL Formula 4 oil through it. A 3 angle valve job was performed in April by Fat Max Racing, who also installed new valves, DRZ valve springs, and retainers. Valve clearances were always kept in specs It also has a high compression base gasket and new DID silent cam chain installed.-$1,400
http://i147.photobucket.com/albums/r304/z400rider14/FRESHZ7.gif

http://i147.photobucket.com/albums/r304/z400rider14/FRESHZ5.gif

-Elka triple rate, ride height and compression adjustable, piggyback reservoir front shocks. They are standard travel and valved for a 160lb rider w/ +2" a-arms. Theyhave 30 hours of riding time on them since they were last rebuilt in February of 2006. The only flaw is the paint on the springs is slightly rubbed off, from the use of Elka shock covers-SOLD

-Stock frame Powdercoated gloss red and gussetted by Bare Performance- $500 (not willing to ship)
http://i147.photobucket.com/albums/r304/z400rider14/FRAME3.jpg

http://i147.photobucket.com/albums/r304/z400rider14/FRAME2.jpg

http://i147.photobucket.com/albums/r304/z400rider14/FRAME1.jpg

-Burgard standard travel +2" a-arms. (red bottoms, chrome plated tops)- $300
http://i147.photobucket.com/albums/r304/z400rider14/a-arms1.jpg

http://i147.photobucket.com/albums/r304/z400rider14/a-arms2.jpg

http://i147.photobucket.com/albums/r304/z400rider14/a-arms3.jpg

-FMF Factory 4 full titanium exhaust w/ powerbomb header-$250
http://i147.photobucket.com/albums/r304/z400rider14/exhaust.jpg

-Stock subframe Powdercoated gloss red-$150

-Lonestar axcaliber adjustable rear axle. Includes brake and sprocket hubs. Adjusts from stock to +4" overall.-SOLD

-AC Racing pro peg nerf bars w/black nets-SOLD

-Dyna Programmable Ignition for use on 2003 and 2004's-SOLD

-Stock plastics w/ only a couple minor scratches (race cut)-$100

-Razr front (70%) and rear tires (50%) on stock rims-SOLD

-Stock headlight (no scratches or cracks)-SOLD

-DP front rotors (less than 20 hours of use)-$60
http://i147.photobucket.com/albums/r304/z400rider14/FrontRotors.jpg

-Elka front shock covers-$40

-Lonestar extended steel braid front brake lines (includes banjo bolts and crush washers)-$50
http://i147.photobucket.com/albums/r304/z400rider14/brakelines.jpg

-Pro Armor full belly skid plate w/ all required hardware-SOLD

-Pro Armor swingarm skid plate w/ all required hardware-SOLD

-AC Racing front bumper-SOLD

-Yoshimura/Suzuki frame guards-SOLD

-JT steel sprockets (13-41 gearing)-$35
http://i147.photobucket.com/albums/r304/z400rider14/sprockets.jpg

-K&N air filter with Alba oversized billet adaptor-SOLD

-FMF Power-up Jet Kit w/ all jets included-SOLD

-Powermadd hand guards and mounting kit (red/black)-SOLD

-Maier hood(black)-$25

-Stock tail light w/ bulb and wires-SOLD

-Gunnar Tether kill switch(closed circuit)-SOLD

-Moose E-Z Pull clutch lever-SOLD

-Custom made rear fender brackets (w/ all required hardware)-SOLD

-RK X-Ring chain-SOLD

-Renthal bars-SOLD

-Pro Design Case Saver-SOLD

-Motion Pro cables(clutch and throttle)-$10

I HAVE ALL STOCK PARTS EXCEPT:
THROTTLE
REAR BRAKE MASTER CYLINDER
FRONT BRAKE MASTER CYLINDER AND LEVER
REAR AXLE
FOOT PEGS
HEAL GUARDS
TAILLIGHT
HEADLIGHT
BARS
UPPER SHOCK MOUNT BOLTS

http://i147.photobucket.com/albums/r304/z400rider14/FRESHZ2.gif

http://i147.photobucket.com/albums/r304/z400rider14/FRESHZ4.gif

http://i147.photobucket.com/albums/r304/z400rider14/FRESHZ6.gif

http://i147.photobucket.com/albums/r304/z400rider14/FRESHZ1.gif

http://i147.photobucket.com/albums/r304/z400rider14/FRESHZ3.gif

[FaCtOrYfReAk]

Lonestar axcaliber adjustable rear axle

What are you asking???Thanks

[JSmall]

Will the stock headlight be forsale?

[Vindex Injuriae]

Interested in axle - sent you PM last night.- J

[z400rider14]

yes..the stock headlight is for sale. It is in great shape w/ no cracks. I am asking $70 +shipping

[z400rider14]

asking $150 w/out shipping for the lonestar axle. Vindex, i replied to your message.

[450rutmaker]

how much for fenders/seat and mounting brackets?

[Vindex Injuriae]

I'll take the axle - PM sent for total.

[z400rider14]

fenders $100
seat $30
custom rear fender brackets $20
both stock front fender brackets $20
If u buy it all, ill sell it for $150 w/out shipping.

[hawaiikfx400]

pm me a price for the miar hood and moose ez pull and the pwermadds whats the colors on the hood and the powermadds intrested.aloha

[JSmall]

Originally posted by z400rider14
yes..the stock headlight is for sale. It is in great shape w/ no cracks. I am asking $70 +shipping

I'll take it. Sending you a PM

[Michwolv60]

how much for the dyna?

[z400rider14]

I already got 2 offers of $115 w/ out shipping. So...$125?

[indyZrider]

u have a pm

[meankfx]

how much for the burgard +2 A arms

[z400rider14]

Burgard +2" a-arms-$300 w/ out shipping

[fast_enough]

How about a nice price on that motor?

[z400rider14]

$1500 shipped

[ZSNOW]

full factory 4 exhuast?
just the factory 4 slip on and mid pipe with out header?

[Vindex Injuriae]

Just waitin for the final price on the axle shipped to 58701! I'll send the money when I hear from you! - J

[z400rider14]

I would like to sell the whole exhaust system together.

[ZSNOW]

whole system how much?

[z400rider14]

Vindex- i sent u a pm, sry for the delay
ZSNOW-$250

[Vindex Injuriae]

Money sent for axle and skidplate - J

[Zemo]

Price on the front and rear plastic and brackets shipped to 77575 ? Don't need the seat

[z400rider14]

Zemo, u need the stock front fender brackets as well, or just the rear?

[Zemo]

I'll take both, racing in the woods figure I'll break 1 sooner or later

[N.J.C.]

I want the Dyna CDI - I have paypal and can make a payment as soon as I get an address to send it to. Please let me know asap! PM me if needed. Thanks!

[z400rider14]

NJC, i sent u a message

[N.J.C.]

I tried to send my offer but your box is full. SO here it is. I'll pay you $120 shipped right here and now....I have paypal and my finger on the "pay now" button. You decide. You can sell that puppy today!

[N.J.C.]

BTW - I'm the same fella that asked about your Elka's on Z400central.

[z400rider14]

$125 shipped n u got yourself a deal

[N.J.C.]

Give me an address to send $$$.

[z400rider14]

NJC-message sent w/ paypal address

[N.J.C.]

Replied to your message. PayPal didn't accept that address though. Did you type it correct? Got another address? What's the deal?

[N.J.C.]

Nevermind....got it to work. Not sure why it wouldn't go through the first few times I tried.

Anyways.....you're paid! Thanks again.

[yamr6bike]

Pm sent.....

Pro Armor full belly skid plate shipped to 12759. THANKS

[JSmall]

I got the headlight I bought from z400rider14 yesterday. It was packaged up very well and in great condition as described:D

Thanks

[z400rider14]

I got some more pics up

[ryan2121]

if you still have the elkas i want them let me know something

[Donkey1]

How much for the frame? Do you have an aftermarket swingarm? I live very close and need this stuff.

[Donkey1]

How much for the frame? Do you have an aftermarket swingarm? I live very close and need this stuff.

[z400rider14]

Donkey-i sent u a pm

[Donkey1]

I got the pm. I would like to look at the stuff you have. Price is good on the frame.

[Vindex Injuriae]

Just so y'all know - bought the axle and rear skid, packaged great, quick shipment and the parts were in good shape. Great seller, wouldn't hesitate to buy from again!



-J :D

[z400rider14]

what other parts do u want to look at? R u gonna stop by or do u want pics?

[Donkey1]

Let me see pics of frame and skid. I might be able to come get the stuff on Sunday and I might buy more.

[z400rider14]

i already sold the skidplates but i will get some pics of the frame and put it up on here.

[Donkey1]

Lets see the pics. I am ready to buy. Do u have a title?

[z400rider14]

added pics of the frame, n i do have the title for it

[Donkey1]

Can I get a phone # and directions maybe can come get frame today

[JoE4554]

do you still have the shocks?? if so how long are they eye to eye??

[z400rider14]

Donkey- i sent u a PM
Joe- I will measure them and get back w/ u.

[Nafterclifen]

I'm surprised nobody has claimed the exhaust/jet kit? I'll take them if still available! E-mail is nafter@ptd.net

Has the exhaust been modified, it looks shorter? Also, is all the jetting hardware included? This will be my first time jetting the quad.

[z400rider14]

nafter- i sent u an email

[z400rider14]

Joe- the front shocks are still available and the eye to eye measuement is 17" (standard travel)

[KSZ400rdr]

Tried to return your PM, but your box is full. I am in Junction City, KS. I really wish you would reconsider not willing to ship!

Thanks,

Stuart

[z400rider14]

just cleaned out my PM box. Its not the fact that i cant ship them, its just that it will b over $50 and i doubt anybody will be willing to pay that.

[z400rider14]

Dannyz400, your pm box is full. I still have the elkas, n with shipping they will be $530. Let me know when u send the payment and i wil ship them out within 24hours. My paypal address is ltracer48@netscape.net

[polish 711]

do u still have the motor and how much?

[polish 711]

do u still have the motor and how much?

[z400rider14]

yea i do, and im askin 1,500

[polish 711]

1000 shipped. there is on another thread about a full redone ltz motor with 0 hours on it for 800. but i have no need for aftermarket and rather have stock oem engine.

[dannyz400]

do u still have the shocks? pm me. thanks

[z400rider14]

just updated the prices

[pimpinyfz450]

if you still have those elkas ill takem

[bah1491]

I'll give you $250 shipped for the FMF....Going to zanesville, Ohio 43701

[z400rider14]

need $270 shipped

[z400rider14]

pimpinyfz- the elkas r already sold

[z400rider14]

added more pics

[Zride400]

i will buy the hood for $25

my name is tom my email is thofar12@yahoo.com or give me a call at 610 273 2156

[billyboy]

How about a stock swingarm?
Any pics?
How much?

[my88r]

Stock plastics w/ only a couple minor scratches (race cut)-$100

pics to ktm200xc much shipped to 14845

[dannyz400]

yo, i was wondering if you still have the frame. i tried to pm you but your inox is full. if you have it i have an offer for u and i can comepick it up. either shoot me a pm or give me a call at 908-892-9283. thanks alot and im realy interested and need a frame so let me know as soon as possible. thanks again.

[dannyz400]

hey, im not sure if you had tryed to call me or not, please if you didnt call me about the frame at 908-892-9283 .....if you did try to call me i apoligize for not answering or not knowing who you were, becasue i got a call from a 585 number idk if that was you but if it was please call me back. and even if you dont have the frame please call me and let me know if ytou do or dont. thanks!

[Hanes15]

Interested in the a-arms. The pics didnt work. You can e-mail me them at zphanes17@bak.rr.com. I tired to pm you but your inbox is full.