pingel tether, how to?

[csimp3]

i have a pingel tether and i need to know how to wire it up, it only has 2 wires, one red and one blue, where do they go? thanks

[jfarrar30]

is it the normally closed switch?if you have ditched the black blob you can hgook it to the orange wires where the stock kill was.

[nlramsey0688]

yeah i have the same question but with a pro armor tether, i bought it at a race because it was required but i didnt have time to hook it up so i just hid the wires then raced, but in the rush of putting it on i lost the directions...

[armysig]

Here is a good write up on your question. It also tells you how to make a kill button a starter for quads.

I hope this helps!


http://bareperformance.com/news/?page_id=62

[Icrashed]

Its easy one wire to the red wire on the tip over switch other to a ground. Done!

[nlramsey0688]

thanks for the help i think im going to attempt it later on today so ill let you know how it goes

[nlramsey0688]

alright well my attempt didnt go to well and im totally lost... if someone could post pictures and directions of a step by step for idiots way to install this i would highly appreciate it... PLEASE HELP!!!