Race Ready 300ex Part out!!!

[Cody_300ex]

GDH Racing +3.5 Longtravel A-arms - Powder coated bright Red, Accepts 400ex length shocks or YFZ shocks The PC is in average shape. Very strong and rare a-arms, Like 1 of 15 pairs, if that. With 2/3 offset wheels it is right at 49.5 and lowered down for TT Its right under 50 Inches. I have owned them since about April of last year. They also have special mounts for a swaybar. Also if you get a Shock relocator you can run 19.5 and 20 inch shocks on it depending on the relocator. In my opinion and from my experience when these a-arms are mated with the right shocks it can't be beaten, it's the best front end on the market for the 300ex. Shoot me an offer

Ricks Hot shot CDI - Works great on any semi-modded 300ex motor, used it for about six months. It still works, tried it on a friends 300ex not long ago. 40 bucks shipped

Frame- Pretty good frame, no cracks or breaks, structurally sound. Needs a PC or paint job. No title but I do have the bill of sale. I Will Rubber coat it for an extra 35 bucks. Make Decent Offer

Stock rear shock - Good shape, not blown. 45 shipped.

Stock Gas tank W/ Polished Gas cap - Nice shape, not any leaks. There is one dent at the very top of the tank. Some slight wear on the paint but very structurally sound. Comes with the petcock and the plastic peice used to adjust it. Make Offer

Stock Rear Plastic w/ brace - ok shape, has a few white spots, and quite a few scratches. No cracks or breaks tho. Red. 75 + shipping

Stock steering Stem - Straight, good shape, will include polished Handlebar clamps & bolts. 65 shipped

White 250r race cut front Fenders w/ red hood - Hood is in great shape but the Fenders are about shot. Good structural Shape but just rough looking, would look fine with a little bit of sanding. Will include the adapters to put on a 300ex. 35 + shipping


Durablue Rear lowering kit - Comes with all hardware, in good shape. 40 shipped

Complete Brake system Front only - Extremely good pressure, decent pads, no leaks what so ever, No bleeding needed. Comes with SS front brake lines, Calipers, rear lines, Both master Cylinders, everything, even the rotors if ya want em - MAKE OFFERS!!

Footpegs - Painted with 2 layers of Rubbercoat, Freshly, sharpened, no cracks, good condition - 45 shipped

Full chain and sprocket set - A 13 & a 15 tooth front sprocket, a 38 & 33 tooth Rear sprocket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers

Stock Skid Modded Swingarm Skid Plate - Welded 10 gauge metal to it to strengthen it up, Rubbercoated black, looks like new. - Make offer

Front Hubs - I have three of them. Bearings and studs where replaced in two a year ago. The color is also in great shape also. - Make Offer

Stock Honda Throttle Housing - The Top is PCed chrome, The body is fire Red, and the clamp is prism Black. Very smooth, a little wear but not to bad. - 40 shipped obo

Stock 300ex Tie rods - Polished, straight where used for maybe one year. Never Bent. - 15 shipped

400ex Triple Rate Works shocks - One shock is fine, the other will need a shaft, spring retainer, rubber bumper, and the washers. The bodies have been polished. Works quoted me 75-90 bucks including labor to fix. - $65 shipped

Shoot me some offers on this stuff, It just sits in my basement taking up space.

Any Other part you can think of, Just ask, I will more than likely have it if it isn't already sold. I will consider trades for LTR, and possibly car parts.

You can call my Cell 1-270-210-8952 After 3:00pm about any parts for a 300ex you could possibly need. Also e-mail me at fastandthefurious67@msn.com

Just ask about anything else, I have a garage full of parts for 300ex's

[Project300EX]

pm'd

[enduro400rider]

would you sell the head off the motor? you could keep your cam and i could send you a very nice stock head for you to put back on

[Cody_300ex]

Originally posted by enduro400rider
would you sell the head off the motor? you could keep your cam and i could send you a very nice stock head for you to put back on

Im might think about it, shoot me and offer but more than likly not.

[ZeroLogic]

How the gas tank? Any cracks or rust? How much?

[Cody_300ex]

Its In good condition, no rusts or cracks. But its not coming off till i get some bigger parts sold.

[Cody_300ex]

bump

[Caseys 300ex]

I sent you a pm Cody.

[Cody_300ex]

Bump. I also have a Billet Megacycle cam that has .350 lift and 290 degrees in duration. It was a spare cam I had..

[Cody_300ex]

Pic's

[Cody_300ex]

another

[Cody_300ex]

another

[Cody_300ex]

another if you want more just ask

[PolarisRider]

How much for the header?

[Caseys 300ex]

how much do u want for your starter soleniod.

[Cody_300ex]

Bump, new stuff added and prices dropped..

[Cody_300ex]

bump

[Caseys 300ex]

How much do you want for your soleniod?? Plz answer!!

[Cody_300ex]

Originally posted by Caseys 300ex
How much do you want for your soleniod?? Plz answer!!

Its going with the motor, sorry.

[Caseys 300ex]

Alright thanks anyway

[ryanh250ex]

Just wanted to tell yall that I bought the Axis shock :D

[Cody_300ex]

Pics of the head w/ the TC engraving

[Cody_300ex]

another

[Cody_300ex]

Bump

[Cody_300ex]

Everythings still here, I just cleaned it up really good, and changed the oil yesterday.

[Caseys 300ex]

Will you sell the soleniod now?

[kwik02gixxer]

will you take $100 shipped for the rear plastic to 43102?

[Cody_300ex]

The Motor and Rear shock are pending payment as of right now. I have dropped the prices on several parts. I need to get rid of this stuff fast now.

[DJR300ex]

$65 bucks shipped to 65536 for the 250r front plastic?

[Cody_300ex]

Originally posted by DJR300ex
$65 bucks shipped to 65536 for the 250r front plastic?

75 and there yours

[DJR300ex]

ok cool. do you have any better pics of them?

[DJR300ex]

oh and one more thing, do you think they would work with my clarke tank?

[Cody_300ex]

Yeah they should, I will send the mounts that I made for them. The 2 far rear mounts are zip tied. no real better pics..

[JoE4554]

do you still have the stock swingarm?? if so , do u know if its aluminum or steel??

[Cody_300ex]

I still have it, It is steel.

[JoE4554]

ill take it , pm me so i can send a mo and how much

[Cody_300ex]

Clean out your PM box Joe

[JoE4554]

cleaned out

[Cody_300ex]

Bump, I need to get rid of this **** fast, make me offers on parts.

[Cody_300ex]

Bump...

[Cody_300ex]

upppers

[scooter2479]

Do you still have the frame? Any rust? Rock botton price?

also do you still have the red race cut fenders and are those front or rear?

[Cody_300ex]

Originally posted by scooter2479
Do you still have the frame? Any rust? Rock botton price?

also do you still have the red race cut fenders and are those front or rear?

I still have the frame, there is some surface rust, nothing bad tho. tell me how much you have to spend and I'll think on it. Yes I still have the red race cuts, there fronts...

[Cody_300ex]

Have it down to a rolling chassis, start making me offers on any part you can think of!

[Cody_300ex]

To whoever wanted pics of the header..

[Cody_300ex]

another

[Cody_300ex]

last

[Cody_300ex]

bump

[Cody_300ex]

Bump

[DJR300ex]

100 shipped for the cam?

[DJR300ex]

if i bought the cam from you would i have to have hardened rocker arms too?

[Cody_300ex]

Originally posted by DJR300ex
100 shipped for the cam?

This is a 200 dollar plus Billet cam. You should be able to come up with 20 extra bucks.... No all it requires is H/d valve springs.

[DJR300ex]

pm'd

[beefcake]

I've been looking for an exhaust, but your price seems almost as much as new......could you come down a bit?

[300ex_#387]

$75 shipped for header?

[Cody_300ex]

Originally posted by beefcake
I've been looking for an exhaust, but your price seems almost as much as new......could you come down a bit?


shoot me an offer

[Cody_300ex]

Pics of the nerfs

[Cody_300ex]

Another, they will come with black nerfs nets, there just getting washed right now...

[markvette]

clean out your pm box i pm'ed you a offer on the pipe. let me know when you clean it out so i can pm you again.

Mark

[Cody_300ex]

Ok It's clean....

[Cody_300ex]

Still have plenty of parts, keep the offers coming.....

[Cody_300ex]

OK guys, I need 700 bucks in about a week to get enough money for my new LTR please make me some offers on this stuff I need it gone ASAP!!

[Cody_300ex]

TTT

[hondarider110]

do you have a cam, springs and valves left ? if so how much

[Cody_300ex]

I have a cam, no valve springs or Valves.

[Caseys 300ex]

What kind of cam is it? and how much do u want for it?

[XCAdam89]

I'll have the money order out tonight hopefully. Thanks again!

[hondarider110]

what kind of cam and how much

[Cody_300ex]

Heres the info i have on the cam


Megacycle Race Profile Billet cam - .370 Valve Lift .272 Duration @ 40 Degrees. Has about 75 hours on it. Very good shape. Good powerful cam. - 120 shipped OBO!

[DJR300ex]

i blew a front shock yesterday, whats the cheapest you can sell me your YFZ shocks?

[Cody_300ex]

Originally posted by DJR300ex
i blew a front shock yesterday, whats the cheapest you can sell me your YFZ shocks?

No less than 195 shipped Its going to be at least 15 bucks to ship these depending on location...

[markvette]

hey not to cause any problems but i think people should know what they are buying. i done a search on that cam, its an awesome cam but their website says you have to use better springs and the shortened valve guides to run it. just to compare i checked web cams website and their cam that has 360 of lift they also say you have to use the shortened valve guides. like i said not trying to cause trouble, just dont want someone to buy it and expect to just drop it in and run it.

Mark

oh i still may be interested in the pipe if you still have it.

[Cody_300ex]

Originally posted by markvette
hey not to cause any problems but i think people should know what they are buying. i done a search on that cam, its an awesome cam but their website says you have to use better springs and the shortened valve guides to run it. just to compare i checked web cams website and their cam that has 360 of lift they also say you have to use the shortened valve guides. like i said not trying to cause trouble, just dont want someone to buy it and expect to just drop it in and run it.

Mark

oh i still may be interested in the pipe if you still have it.

I still have both, but on the cam, in my motor there where no shortened valve guides and it was perfectly fine.

[Cody_300ex]

Bump

[SGARCIA89LX]

how much for the wheels???and will they fit a 250ex

[Cody_300ex]

Originally posted by SGARCIA89LX
how much for the wheels???and will they fit a 250ex

Im keeping them

[Cody_300ex]

Come on guys throw me some offers!!! I need this chit gone ASAP!

[Cody_300ex]

Originally posted by Cody_300ex
Come on guys throw me some offers!!! I need this chit gone ASAP!

[XCAdam89]

Did you ever get my M.O. for the Nerfs????

[Cody_300ex]

Originally posted by XCAdam89
Did you ever get my M.O. for the Nerfs????

Yes, I have recieved it and will get them out ASAP.

[Cody_300ex]

Originally posted by XCAdam89
Did you ever get my M.O. for the Nerfs????

Sorry about the wait on the nerfs, they should be shipped tommrow. Ive been on spring break all last week.

[Cody_300ex]

Ok If somebody can have 485 dollars to me by the end of the week you can have my whole entire front end, front shocks, a-arms, ball joints, bolts everything. I need to get this LTR before the guy sells it or I may not come across another deal like this.

[XCAdam89]

Originally posted by Cody_300ex
Sorry about the wait on the nerfs, they should be shipped tommrow. Ive been on spring break all last week.

That's fine, I'm in no hurry really.

[JIMFROMTEXCO]

rear brake system and sterring stem

[Cody_300ex]

Originally posted by JIMFROMTEXCO
rear brake system and sterring stem

rear brake system is sold, I still have the steering stem.

[thebrahamkid]

To the top for ya!

Thanks for the axle, hubs, and rear brake! Everything working great!!!!

Ryan

[Cody_300ex]

Originally posted by thebrahamkid
To the top for ya!

Thanks for the axle, hubs, and rear brake! Everything working great!!!!

Ryan

No Problem, Glad they worked out good!

[XCAdam89]

Originally posted by Cody_300ex
Sorry about the wait on the nerfs, they should be shipped tommrow. Ive been on spring break all last week.

Just want to verify they have been shipped?

[Caseys 300ex]

pm'ed

[Caseys 300ex]

Can you put up a picture of your chain and 4 sprockets plz. Ill buy them but i want to see a picture first. Thanks! Also can you pm me your address so i can send out a m/o. Thanks

[Caseys 300ex]

I dont mean to rush you but i need the sprockets and chain bad. :(

[Cody_300ex]

Bump

[mr2turbo]

Originally posted by Cody_300ex
[B]NO LOWBALL OFFERS!!!

Full chain and sproket set - A 13 & a 15 tooth front sproket, a 38 & 33 tooth Rear sproket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers



Just ask about anything else, I have a garage full of parts for it.... PRICES REDUCED!!!!

I have no idea what this stuff costs but I was wondering how much you would want shipped for this stuff, and also if you have a rear axle because mine is slightly bent.

Also all the stuff that goes on the handle bars(headlight, plastic, ignition, and all the oil and neutral light) I think you know what i'm talking about.

[Cody_300ex]

Originally posted by mr2turbo
I have no idea what this stuff costs but I was wondering how much you would want shipped for this stuff, and also if you have a rear axle because mine is slightly bent.

Also all the stuff that goes on the handle bars(headlight, plastic, ignition, and all the oil and neutral light) I think you know what i'm talking about.

I dont have any of the stuff from the handlebars, nor the axle, I do still have all the sprokets and chain stuff. I'll PM you the Price.

[amx_#02]

you still have those yfz450 front shocks??

[Cody_300ex]

Originally posted by amx_#02
you still have those yfz450 front shocks??

Still have them

[JIMFROMTEXCO]

how much on the shocks now?

[Cody_300ex]

205 Shipped on the YFZ front shocks

[amx_#02]

i may be intrested in those shocks i'll no for sure tomorrow

[amx_#02]

hey i won some ohlins shocks off ebay so im not gonna get those yfz450 i may be needing some other parts i'll let you no when i figure out wat all i need

[Cody_300ex]

Originally posted by amx_#02
hey i won some ohlins shocks off ebay so im not gonna get those yfz450 i may be needing some other parts i'll let you no when i figure out wat all i need

Ok thanks for letting me know, Just Pm me if you need anythign else.

[mr2turbo]

sorry for the delay but last weekend I went up north riding and broke my atv; so right now I need to get it running before I buy stuff to make it fast! I'll let you know once I have it going and see if you still have the chain and sprockets because I am still interested!

[Cody_300ex]

Originally posted by mr2turbo
sorry for the delay but last weekend I went up north riding and broke my atv; so right now I need to get it running before I buy stuff to make it fast! I'll let you know once I have it going and see if you still have the chain and sprockets because I am still interested!

I still have it all.

[Cody_300ex]

Updated

[Cody_300ex]

bump

[amx_#02]

my cuz'n has been buggin me about my swingarm skidplate so ive been looking for him one...do you still have that 1 and if ya do how much

[Cody_300ex]

Originally posted by amx_#02
my cuz'n has been buggin me about my swingarm skidplate so ive been looking for him one...do you still have that 1 and if ya do how much

I got a modded stock for i'll sell ya for 27 shipped

[amx_#02]

alrite i'll give you a shout when i talk to him

[amx_#02]

he wants to no if you'd take 20?

[Cody_300ex]

Originally posted by amx_#02
he wants to no if you'd take 20?

I need 27 to cover shipping,..

[amx_#02]

when he gets me the 27 dollars i'll send you a money order could you pm me your address

[67mopar]

do ya still have the maier race cut fenders?

[Cody_300ex]

Originally posted by 67mopar
do ya still have the maier race cut fenders?

Still got em

[67mopar]

do ya have a picture of them

[Cody_300ex]

plastics

[Cody_300ex]

Still have a bunch of parts

[JBacon]

Do you still have the 400ex front works shocks? Or the good one at least?

[Cody_300ex]

Originally posted by JBacon
Do you still have the 400ex front works shocks? Or the good one at least?

sent you a PM

[JBacon]

Originally posted by Cody_300ex
sent you a PM

I never got it???

[brads01ws6]

could you send pictures of you mier plastic to brads94z28@Yahoo.com

[Cody_300ex]

Originally posted by brads01ws6
could you send pictures of you mier plastic to brads94z28@Yahoo.com

Sorry, there sold

[Cody_300ex]

Bump, still have quite a bit of these parts left!

[u_want_some]

Muffler? Nerfs? Bars? Rear brake caliper?

[Cody_300ex]

Hey guys I still have the parts listed, I updated the list. These parts are doing me no good what-so-ever, they have been sitting around my house and garage since May, I'm ready to get rid of them, and if you dont see anything up there I have Just IM, or PM me and ask! I have a LTR these parts are just taking up room for LTR parts....

[honda300EXtreme]

hey,, is there any chance you have a swingarm pivot bolt you would let go cheap...

thanks

[Cody_300ex]

Originally posted by honda300EXtreme
hey,, is there any chance you have a swingarm pivot bolt you would let go cheap...

thanks

I went out and looked and I have one but its trashed from removing it, its still straight, just the threads are done for. Sorry

[MY FYN 79]

Do you still have the hubs and tie rods? If so, do the tie rods have good ends on them?

[Cody_300ex]

I have the hubs. No tie rods or ends, sorry.

[Caseys 300ex]

Do you have a headlight laying around thats red?

[Cody_300ex]

Originally posted by Caseys 300ex
Do you have a headlight laying around thats red?

Nope, sorry.

[MY FYN 79]

How much for the hubs?

[Cody_300ex]

Originally posted by MY FYN 79
How much for the hubs?

Front? Rear? or Both?

[MY FYN 79]

Fronts only.

[Cody_300ex]

45 Shipped

[TRX-330]

do you have the handle bar clamp still and is it for fatty bars, if so how much shipped.

[1995300ex/400ex]

how much for the exhaust and header and what kind are they?

[Cody_300ex]

Originally posted by 1995300ex/400ex
how much for the exhaust and header and what kind are they?

They have been sold

[amx_#02]

do you still the LT a-arms and if so do you still have the tie-rodes?? if so i'll may be intrested

[Cody_300ex]

Originally posted by amx_#02
do you still the LT a-arms and if so do you still have the tie-rodes?? if so i'll may be intrested

STill have them

[amx_#02]

alrite how low would u go on the price?

[Cody_300ex]

Originally posted by amx_#02
alrite how low would u go on the price?

350 is the lowest I will go...

[d kelley]

do you have a fuel tank for the 300??

[Cody_300ex]

Originally posted by d kelley
do you have a fuel tank for the 300??

no fuel Tanks

[honda300EXtreme]

hey,

please tell me you have an inner left side case
the one with the oil drain bolt on the bottom

let me know


thanks alot


-mike

[Cody_300ex]

Originally posted by honda300EXtreme
hey,

please tell me you have an inner left side case
the one with the oil drain bolt on the bottom

let me know


thanks alot


-mike


Sure Don't, sorry.

[honda300EXtreme]

hey i have a few questions about the works front shocks

what is your bottom dollar?
so the other shocks is in perfect working condition?
do they have rezzy's?
can you get some pics?


thanks alot


-mike

[sadinkins]

i am interested in the a-arms,i am in ky how much for them and when could you ship them?

[Jake250ex]

I havent read thru all 12 pages, but if you want to deal a little on the shocks and A arms pm me

[Cody_300ex]

Bump, Updated. I'm tired of looking at this stuff in my basement, need more room, and money.

[JIMFROMTEXCO]

make me a deal on the rear plastic, stem, and 400ex shocks

[Cody_300ex]

Im bumping this up again, These parts have just been sitting her for over a year now, they need a new home and I need money for the LTR and my car! Also I am not on here everyday anymore and my e-mail notifications do not work so if I don't respond to a thread or PM E-mail me!

[AGPallstar109]

cody i want to buy your a-arms get back to me, ive been trying to get a hold of you forever, i have the money and im ready, thanks mike

[Cody_300ex]

Stuff is still here and everybody who says there interested in the a-arms has yet to come threw with money....

[Project300]

Intersted in cdi, and nerf bars and aftermarket grab bar if you have one.

Let me know

[Cody_300ex]

Originally posted by Project300
Intersted in cdi, and nerf bars and aftermarket grab bar if you have one.

Let me know

still have the CDI

[twisted300ex]

u still have the swing arm? and if so how much?

[exkowboy]

STILL HAVE THE CARB?

[Cody_300ex]

Originally posted by exkowboy
STILL HAVE THE CARB?

no carb

[Imbroke]

do you have an after market header and a rear brake caliper

[smarvin05]

Do you still have the chain and sprokets? How much?

[schl48]

do u have a camshaft? how much? thanks

[bsolomon918]

how much for slip on shipped?

[Cody_300ex]

wow i cannot believe people still posted in this thread, I sold all these parts years ago..