Going To Mod Need Some Help

[exrider5]

I want to put a new swingarm on my ex and i think im going to go with an Extend length of 1.25 for mx. But i need to know which swingarm would be the best and also i want to bore it to a 416 what other motor accesories should i get for it. Thnx

[Honda#4]

I have a Roll Design +1.25 swinger and it is wonderful i'll post pics if you want.

[exrider5]

that would be nice thnx.

[Honda#4]

here you go.

[Honda#4]

another

[Honda#4]

last one

[exrider5]

how much did you pay for it

[Honda#4]

I bought it off of Chino886 on here for $675, about 50% off of what it retails for.

[j450rking]

you should get a 11.1 piston a hot cam and a port and polish and a full exaust if you don't have one and a after market air filter like uni or k&n oh and a larger valve job

My 416 mods -

10:1 piston
Stage 2 hotcam (woods riding)
K&N filter
UM airbox
rejetted (recommeded to me to start with a 42 pilot and a 170 main)
FMF slip on (Honda header is pretty good from what I've heard)

My mechanic tells me the port and polish ain't worth the $$$. It helps, but not hundreds of dollars worth.

I'm told the stock valves are good enuf.

[xben719]

Hey HONDA#4 I see that you run XC with your extended swingarm and I was wondering you thoughts.

[j450rking]

Originally posted by garandman
My 416 mods -

10:1 piston
Stage 2 hotcam (woods riding)
K&N filter
UM airbox
rejetted (recommeded to me to start with a 42 pilot and a 170 main)
FMF slip on (Honda header is pretty good from what I've heard)

My mechanic tells me the port and polish ain't worth the $$$. It helps, but not hundreds of dollars worth.

I'm told the stock valves are good enuf.


i don't mind spending $230 for a port,polish and larger valves to get the best out of my engine and i figure i am going to want more power sooner or later so why not sooner i'v heard the port and polish ads 5 hp and thats pretty good

[Chin_Chilla]

^^^^^I would have to agree. The cheapest BY FAR for port/polish and valve job is C&D Racing. $175 for P/P and I beleive it was $60 for 3 angle valve job. Garandman, who was going to do your porting/polishing for 'hundreds'?

[Honda#4]

xben719 I don't race at all, I bought the swinger cus of the deal I got for it, plus it's Roll Design. I go mad crazy over Roll Design stuff.