300excrazy98
01-19-2007, 12:52 PM
Hey guys i am looking to trade my 250r for something else. I really want a 4 stroke, would really really want to trade for a 450 or some sort, 450r yfz etc or another quad and a dirtbike...
Any way,
Its a 1987 295r
Its got...
PEP triple rate front shocks
Pep Neopream shock covers
Maier Plastics (black) race cut front + back
Nacs Graphics
Nacs Seat cover
Renthal CR HIGH bend bars
Pro Design Kill switch (tether)
Motion Pro Billet twist throttle
Renthal Full diamond grips
LSR steel braided front brake lines (black)
LRD Ignition
Brand new OEM coil + cap
Bills header (painted high temp flat black)
LRD silencer
LAEGER +1.25 Swingarm
Armadillo .25in thick swingarm skid plate
LSR adjustable axle +2+4
LSR billet tapered carrier
AC bumper
aluminium exhaust flange (oring style)
aluminium Air scoops
Baldwin case saver
Nacs parking brake block off
Nacs snorkel block off
AC Pro Pegs
MSR Quick Adjust lever
Nylon / Delrin swingarm Bearings
Brand new TAPERED axle bearings, (0 hours)
Nacs aluminium brake stay
Polished and sanded 450r shifter
TRX Throttle cover
ENGINE-
Bored 0.030 over by Duncan
Cases bored for a 340 by duncan
MX port and polish by duncan
Cometic Gaskets
Keihin 38mm Airstyker carb
K&N filter with outerwear
Boysen Rad valve
New reeds (Boysen PRO SERIES)
Pro-X piston
Hot rods Crank
YUKON HD GEARS
Hinson clutch basket (no grooves)
all bearings, seals and gaskets are brand new, quad was disassembled, then reassembled by duncan with all parts in engine!!!
Tires-
9 in. HIPERS with RAZR 2s on back
Douglas red labels with fast trekkers up front
I know i am forgetting things...
The frame however does have some welds on it, re-enforcing welds, and others. The quad does come with an extra set of maier plastics and a seat with a Lost Rebel seat cover. A set of bottom end cases, and couple gears and extra clutch basket. I have oils to go with it and spark plugs. Bel-Ray Gear Saver was always ran thro it and Amsoil dominator premix at 32:1 was used. Twist throttle included also.
IF you have any ?s please post here or email me at bxkid53@aol.com and i will try to get back to you asap!
This quad is located in MONTVILLE, NJ 07045
Thank you for looking! I will try to get pics up ASAP!!!
Here is teh quad with different wheels and tires. Now has the orange hipers and fast trekkers in the front.
Any way,
Its a 1987 295r
Its got...
PEP triple rate front shocks
Pep Neopream shock covers
Maier Plastics (black) race cut front + back
Nacs Graphics
Nacs Seat cover
Renthal CR HIGH bend bars
Pro Design Kill switch (tether)
Motion Pro Billet twist throttle
Renthal Full diamond grips
LSR steel braided front brake lines (black)
LRD Ignition
Brand new OEM coil + cap
Bills header (painted high temp flat black)
LRD silencer
LAEGER +1.25 Swingarm
Armadillo .25in thick swingarm skid plate
LSR adjustable axle +2+4
LSR billet tapered carrier
AC bumper
aluminium exhaust flange (oring style)
aluminium Air scoops
Baldwin case saver
Nacs parking brake block off
Nacs snorkel block off
AC Pro Pegs
MSR Quick Adjust lever
Nylon / Delrin swingarm Bearings
Brand new TAPERED axle bearings, (0 hours)
Nacs aluminium brake stay
Polished and sanded 450r shifter
TRX Throttle cover
ENGINE-
Bored 0.030 over by Duncan
Cases bored for a 340 by duncan
MX port and polish by duncan
Cometic Gaskets
Keihin 38mm Airstyker carb
K&N filter with outerwear
Boysen Rad valve
New reeds (Boysen PRO SERIES)
Pro-X piston
Hot rods Crank
YUKON HD GEARS
Hinson clutch basket (no grooves)
all bearings, seals and gaskets are brand new, quad was disassembled, then reassembled by duncan with all parts in engine!!!
Tires-
9 in. HIPERS with RAZR 2s on back
Douglas red labels with fast trekkers up front
I know i am forgetting things...
The frame however does have some welds on it, re-enforcing welds, and others. The quad does come with an extra set of maier plastics and a seat with a Lost Rebel seat cover. A set of bottom end cases, and couple gears and extra clutch basket. I have oils to go with it and spark plugs. Bel-Ray Gear Saver was always ran thro it and Amsoil dominator premix at 32:1 was used. Twist throttle included also.
IF you have any ?s please post here or email me at bxkid53@aol.com and i will try to get back to you asap!
This quad is located in MONTVILLE, NJ 07045
Thank you for looking! I will try to get pics up ASAP!!!
Here is teh quad with different wheels and tires. Now has the orange hipers and fast trekkers in the front.