Wheel Offset

[450R-156]

Whats the stock offset on the front rims of a 06 450R, is it 3+2

[honda4life72]

yes sir it's 3+2

[DJJ450r]

I think its 3.5 +1.5

[honda4life72]

i think my 05s are 3+2 i not sure thow....i can go measure for u if there the same

[Meek]

Originally posted by 450R-156
Whats the stock offset on the front rims of a 06 450R, is it 3+2

:D

[Sjorge450R]

Originally posted by DJJ450r
I think its 3.5 +1.5

yeah cause when I put my bajas on which are 3-2 it made the front end wider.

[d3ktrix]

Originally posted by DJJ450r
I think its 3.5 +1.5

Correct^

My 3-2 douglas made my front end wider then the stock rims.

[D Bergstrom]

They are 4 + 1.5. The size of the front wheels is 10x5.5. (The size is stamped on them somewhere, can't remember where off hand.)This is for my 2004, no idea about the other years, but I would assume they are the same. When I changed to 4 x 1 offset wheels it made the front end about 1" narrower.

Doug

[400exrider707]

Originally posted by D Bergstrom
They are 4 + 1.5. The size of the front wheels is 10x5.5. (The size is stamped on them somewhere, can't remember where off hand.)This is for my 2004, no idea about the other years, but I would assume they are the same. When I changed to 4 x 1 offset wheels it made the front end about 1" narrower.

Doug

This is the correct one, stock wheels are 5.5 " wide.

[jjm400ex]

i maybe confused but wouldnt 4+1 offset be wider then 3+2

[trost66]

4 to 1 would be an inch narrower. When I went with 4 to 1 it made a word of dif for handling. I have +3 arms though. Had to go with 4 to 1 to be legal