Febuary Quad of the Month entry thread

[TheFontMaster]

This month is open to any and all quads. So lets get a good bunch of quads for this month! The entry thread will last until next Wednesday. Here are links the the mods list that you will need to fill out and post with the pics of your quads. And also the rules. Please read through the rules and make sure that your entry conforms to all of them.


Mods list.
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

Rules.
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713

[DMCBanshee]

'96 Yamaha Banshee

Chassis | Suspension | Controls:

Frame: Stock Gusseted Powdercoated Yellow
A Arms: Denton Racing +2+1
Swingarm: Chrome Lonestar -1"
Steering Stem: Burgard +1 Chrome Anti-vibe
Stabilizer: N/A
Axle: Durablue Eliminator
Carrier: R.A.D.
Locknut: Durablue
Hubs F|R: Stock Powdercoated Black
Bars: Pro Taper Fat Bar 1 1/8"
Throttle: 450r Thumb Throttle
Clutch Lever: ASV F3
Grips: Blue Spider
Nerfs: AC Racing
Bumper: Duncan racing with Numbers Plate
Grab Bar: AC Racing with Numbers Plate
Front Shocks: Elka Dual Rates
Rear Shock: Elka Dual Rates
Brake Lines F|R: Streamline Braided Stainless Steel
Throttle Cable: Terry Cable Stainless
Rotors F|R: Stock
Brakes F|R: '06 YFZ 450 Front Calipers
Rims F|R: Douglas Beadlocks
Tires F|R: ITP Holeshot MX


Body:

Plastic: Blue Fenders with Race Cut
Graphics|Seat Cover: Alba Action Flames with AtvSeatCover Chekered Agressor
Number Backgrounds: Nac's
Handguards: Blue Powermadd
Bar Pad: Pro Taper
Fuel Tank: Stock


Engine|Drive System:

Cylinders|Head: MX Ported Wiseco Pistons .020" Milled
Bore & Stroke: Stock
Displacement: 350cc
Reed Valves: V-Force 2
Carburetor: Keihin 35mm CV Carb Kit
Air Filter|Box: K&N with Trinity Adapter
Pipes|Silencers: Paul Turner Mid Ranges Pipes & Fatboy Silencers (Triple Plate Chrome)
Clutch|Plates: Barnett
Gearing F|R: 13T/41T
CDI|Killswitch: Pro Design
Cooling: Pro Design Water Impeller & S.B.R. Super Cooler


Extras: Nac's Billet Kick Start,Nac's Block Off,Chozen Gas Tank Vent Valve,Chozen Pipes Hangers,Chozen Case Saver,Cascade Chain Slider ,Cascade Exhaust Clamps,Cascade Front Brake Reservoir Cap,Cascade Thumb Throttle Cover,Cascade Rear Brake Reservoir Cap,Cascade Dipstick,ATV Fourplay Rear Shock Clamp,U.M.I Gas Cap,Team Alba Laser Cut Stainless Flame Grill,Team Alba Water Pump Cover,Pro Design Billet Shifter,Works Frame Guards,S.B.R. Chrome Stator Covers,Chrome Brake Lever,Lightened Flywheel,Vito's Key +4 Degree


http://w2.bikepics.com/pics/2006/12/29/bikepics-758176-800.jpg
http://w2.bikepics.com/pics/2006/12/31/bikepics-759893-800.jpg
http://w2.bikepics.com/pics/2006/12/31/bikepics-759952-800.jpg
http://w2.bikepics.com/pics/2006/12/31/bikepics-759951-800.jpg
http://w2.bikepics.com/pics/2006/12/31/bikepics-759953-800.jpg
http://w2.bikepics.com/pics/2006/12/31/bikepics-759949-800.jpg
http://w2.bikepics.com/pics/2006/12/23/bikepics-752872-800.jpg
http://w2.bikepics.com/pics/2006/12/23/bikepics-752873-800.jpg

[cody anderson]

TC YFZ450

Rath +2.5"+1" longtravel a-arms

Rath powder coated grab bar

Rath powder coated bumper

Rath powder coated nerf bars

Rath stainless steel laser cut foot pegs

Rath anti-vibe chrome sttering stem

Rath 1-1/8" bar clamps Rath skid plate

Rath gusseted frame

Rath powder coated battery box

Rath Chain roller

Lost Creek Cycles wiring harness

Lost Creek Cycles step seat

TC porting

TC cams

TC piston

TC crank

TC head work

motor 100% tuned and 100% maintined by Tom Carlson, himself.

Powder coated valve cover

Powder coated ignition cover

Powder coated water pump cover

Powder coated clutch cover

Powder coated oil filter cover

Laker Custom tank cover

Laker Custom front plastic

Laker Custom rear plastic

Laker Custom radiator shrouds

Quad Tech seat cover

Quad Tech seat foam

Quad Tech carbon fiber master cylinder guard

Quad Tech carbon fiber case saver

LoneStar anti fade

LoneStar sprocket hub

LoneStar brake hub

LoneStar axle

LoneStar tie Rods

LoneStar tie rod ends

Hiper front 10" carbon fiber wheels

Hiper rear 8" carbon fiber wheels

Hardkor front hubs

Fasst Handlebars

Works connection clutch perch

Steamline steel braidedbrake lines

400EX thumb throttle

Curtis Sparks intake

Curtis Sparks filter

Fox Evolution long travel front suspension

Fox Podium X rear suspension.

[cody anderson]

another...

[cody anderson]

TT set up

[cody anderson]

One more...

[cody anderson]

bunch at once...

[416exbadasrider]

Chassis | Suspension | Controls:

Frame: stock
A Arms: stock
Swingarm: stock
Steering Stem: stock
Stbilizer: stock
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Tag t2
Throttle/Clutch Lever: stock
Grips: oury
Nerfs: stock
Bumper: AC Blackline
Grab Bar: stock
Front Shocks: stock
Rear Shock: stock
Brake Lines: stock
Rotors F|R: stock
Rims F|R: Hiper Beadlocks
Tires F|R: stock front Razr2 rear's



Body:

Plastic: stock
Graphics|Seat Cover: DMP
Number Backgrounds: stock
Handguards: none
Bar Pad: Tag
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 450cc
Cam:stock
Carburetor: none
Air Filter|Box: twin air
Pipe|Silencer:baffle out
Clutch|Plates: stock
Gearing F|R: 13t front 38t rear
CDI|Killswitch:none
Cooling: stock
Other:



http://i131.photobucket.com/albums/p292/miners1523/DSCN0107.jpg








http://i131.photobucket.com/albums/p292/miners1523/DSCN0112.jpg








http://i131.photobucket.com/albums/p292/miners1523/DSCN0111.jpg








http://i131.photobucket.com/albums/p292/miners1523/DSCN0108-1.jpg

[JRP]

Chassis | Suspension | Controls:

Frame: stock
A Arms: walsh +3
Swingarm: stock
Steering Stem: stock
Stbilizer: stock
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock fronts, hiper rears
Bars: tag
Throttle/Clutch Lever: stock
Grips: spider
Nerfs: ac
Bumper: ac
Grab Bar: stock
Front Shocks: Fox Float Evols
Rear Shock: stock
Brake Lines: russell +3
Rotors F|R:
Rims F|R: stock fronts, hiper rears
Tires F|R: kendas all the way, the knarly mxr's



Body:

Plastic: stock
Graphics|Seat Cover: stock
Number Backgrounds: stock
Handguards: powermadds
Bar Pad: tag
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 450cc
Cam: Hotcam stg2
Carburetor: stock
Air Filter|Box: stock
Pipe|Silencer: DASA
Clutch|Plates: Hinson
Gearing F|R: stock
CDI|Killswitch: stock
Cooling: stock
Other: KB valves


http://i124.photobucket.com/albums/p16/jrp859/finished3.jpg
http://i124.photobucket.com/albums/p16/jrp859/finished2.jpg
http://i124.photobucket.com/albums/p16/jrp859/finished1.jpg
Action photos
http://i124.photobucket.com/albums/p16/jrp859/roost4.jpg
http://i124.photobucket.com/albums/p16/jrp859/whip2-1.jpg
http://i124.photobucket.com/albums/p16/jrp859/roost2.jpg

[Harbin_22]

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Walsh +3 LT
Swingarm: Walsh Savior
Steering Stem: Rath +1 Anti-vibe
Stbilizer: Denton
Axle: Lonestar
Carrier: Lonestar
Locknut: Lonestar
Hubs F|R: Lonestar/Lonestar
Bars: Pro Taper 1 1/8
Throttle/Clutch Lever: Stock/ Applied Racing
Grips: Renthal Firm
Nerfs: A/C Standards
Pegs: IMS w/ kickup
Bumper: DG National
Grab Bar: Stock
Front Shocks: PEP ZPS, Big Can, LT
Rear Shock: PEP ZPS, Big Can, LT
Brake Lines: Stream Line SS
Rotors F|R: Stock
Rims F|R: Douglas Ultimate/ Douglas Beadlocks
Tires F|R: Holeshot SX/ Holeshot MXR6



Body:

Plastic: Stock w/ quadtech Hood
Graphics|Seat Cover: Dana Creech Racing/ Quadtech Hump
Number Backgrounds: JPMX
Handguards: N/A
Bar Pad: Pro Taper Molded
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Piston: Sparks 13.5:1, 2 ring
Displacement: 450
Cam: Baldwin MX Grind
Carburetor: Stock
Air Filter|Box: Twin Air
Pipe|Silencer: Rossier
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Stock/ Tusk
Cooling: Stock
Other:Lonestar Seat Latch, lonestar steering stem clamp, DID ERT2 Chain, PEP Upper Chain Roller, Walsh tie rod kit

[Harbin_22]

Another

[Harbin_22]

Last one

[Mean250r]

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Walsh +3 G33 LT
Swingarm: stock
Steering Stem:Stock
Stbilizer: Denton
Axle: Lonestar Axcaliber
Carrier: Lonestar
Locknut: stocker
Hubs F|R: Lonestar/Lonestar
Bars: Renthal Fat bar (tag pad)
Throttle/Clutch Lever:
Grips: Tag
Nerfs:X-Factor/Gibson
Pegs: Xfactor pro peg
Bumper: Tag
Grab Bar: AC
Front Shocks: PEP ARC Big can ZPS
Rear Shock: Stock rebuilt
Brake Lines: Galfer
Rotors F|R: Stock
Rims F|R: Hiper all around 4:1 offset fronts stock offset rear
Tires F|R: Holeshot MXR6 all around



Body:

Plastic: Stock ellis cut
Graphics|Seat Cover: Stock (gotta keep that clean look lol)
Number Backgrounds: none
Handguards: Power madds
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Piston: Wiseco
Displacement: 450
Cam: stock
Carburetor: Stock
Air Filter|Box: K&N
Pipe|Silencer: Nmotion
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Stock/ Pro design
Cooling: Stock
Other:Walsh Tie rods, Tag bar clamps,

Pics: (dont mind some of the pics are dirty)



http://w2.bikepics.com/pics/2007/01/21/bikepics-778024-full.jpg
http://w2.bikepics.com/pics/2007/01/21/bikepics-778025-full.jpg http://w2.bikepics.com/pics/2007/01/21/bikepics-778028-full.jpg http://w2.bikepics.com/pics/2007/01/21/bikepics-778032-full.jpg
http://w1.bikepics.com/pics/2006/09/10/bikepics-675953-full.jpg http://w1.bikepics.com/pics/2006/09/10/bikepics-675955-full.jpg

[bansheeCJ]

2002 Yamaha Banshee

Chassis | Suspension | Controls:

Frame: Stock powdercoated black
A Arms: FullFlight +2 powdercoated blue
Swingarm: stock powdercoated blue
Steering Stem: stock
Stbilizer:
Axle: G-Force
Carrier: stock
Locknut: G-Force
Hubs F|R: Stock
Bars: Renthal for now
Throttle/Clutch Lever: stock
Grips: Scott red grips (waiting for other bars)
Nerfs: none for now
Bumper: Tag
Grab Bar: DG
Front Shocks: Elka dual rates
Rear Shock: stock for now
Brake Lines: stock
Rotors F|R: stock
Rims F|R: ITP Baja
Tires F|R: ITP Holeshot MXR-6



Body:

Plastic: UFO/Maier
Graphics|Seat Cover: Skin Industries
Number Backgrounds: none
Handguards: none...have Powermad but waiting for new bars
Bar Pad: Renthal
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Pro Design Cool Head w/ 21cc domes
Bore & Stroke: stock
Displacement: 350cc
Cam:
Carburetor: stock 26mm
Air Filter|Box: K&N clamp on's w/ Outerwears
Pipe|Silencer: Toomey TR-6's
Clutch|Plates: Dirt Digger
Gearing F|R: stock
CDI|Killswitch: Stock
Cooling: Pro Design in-line super cooler
Other: Cascade spider and web clutch insert, Cascade dipstick, Cascade handlebar clamp, reed spacers, skid plate, TORS Eliminator kit, eyeball light covers, powdercoated blue clutch cover, E-Brake block off kit, discontinued chrome skull water pump cover, Suzuki GSXR tail light, Armadillo water bottle re-locator, boost bottle, FMF ignition

http://i11.photobucket.com/albums/a161/BansheeCJ3/P1060004.jpg

http://i11.photobucket.com/albums/a161/BansheeCJ3/P1060005.jpg

http://i11.photobucket.com/albums/a161/BansheeCJ3/P1060003.jpg

http://i11.photobucket.com/albums/a161/BansheeCJ3/PC250010.jpg

[bassmasterslay]

Chassis | Suspension | Controls:

Frame: Stock Honda Gussetted
A Arms: JB
Swingarm: Stock
Steering Stem: Houser
Stbilizer:
Axle: RPM
Carrier: Honda
Locknut: RPM Anti-Fade
Hubs F|R: Honda
Bars: Tag
Throttle/Clutch Lever: MSR Billet
Grips: Pro-Grip
Nerfs: AC
Bumper: Blingstar
Grab Bar: AC
Front Shocks: Elka LT
Rear Shock: ELKA LT
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: ITP Baja Fronts and Douglas Beadlocks Rear
Tires F|R: Kendal Klaw MX and Holeshot MXR4



Body:

Plastic: Maier
Graphics|Seat Cover: One Industries Gripper
Number Backgrounds:
Handguards:
Bar Pad:
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Ported and Polished
Bore & Stroke: Athena 480 Kit
Displacement: 480cc
Cam: HRC Custom Grind
Carburetor: Kehin
Air Filter|Box: K&N Custom Intake
Pipe|Silencer: Yoshimura
Clutch|Plates: Hinson
Gearing F|R: 13/40
CDI|Killswitch: Pro-Design
Cooling: Stock Radiator
Other: Custom Wiring


http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/P1010020.jpg http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/P1010023.jpg http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/P1010017.jpg http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/P1010018.jpg http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/P1010016.jpg http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/P1010015.jpg http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/P1010014.jpg http://i68.photobucket.com/albums/i4/bassmasterslay/Honda%20Pics/IMG_4184.jpg

[yoshi470]

2005 TRX450R Walsh/Pep

Frame: Stock with walsh gusset/flat black
A Arms: walsh
Swingarm: walsh savior
Steering Stem: walsh +2
Stbilizer: dual terry racing
Axle: rpm II
Carrier: rpm
Locknut: rpm
Hubs F|R: rpm/stock
Bars: renthal fat bar
Throttle/Clutch Lever: stock
Grips: oury
Nerfs: pro armor
Bumper: pro armor
Grab Bar: ac
Front Shocks: pep
Rear Shock: pep
Brake Lines: lsr dual lines
Rotors F|R: stock/wave
Rims F|R: hiper
Tires F|R: mxr4



Body:

Plastic: new OEM
Graphics|Seat Cover: nmotion/quadfast/quad tech
Number Backgrounds:stock
Handguards: acrebis
Bar Pad: -
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: ported head
Bore & Stroke: stock
Displacement: 450
Cam:stage 2
Carburetor: 41 fcr
Air Filter|Box: kn/stock
Pipe|Silencer: nmotion gen1
Clutch|Plates: stock
Gearing F|R: 14/38
CDI|Killswitch: dyna/pro design
Cooling: fluidlyne
Other:quad tech hood

http://i27.photobucket.com/albums/c193/416exmx/MVC-018S.jpg
http://i27.photobucket.com/albums/c193/416exmx/MVC-016S.jpg
http://i27.photobucket.com/albums/c193/416exmx/MVC-014S.jpg
http://i27.photobucket.com/albums/c193/416exmx/MVC-012S.jpg
http://i27.photobucket.com/albums/c193/416exmx/MVC-008S.jpg
http://i27.photobucket.com/albums/c193/416exmx/MVC-003S.jpg
http://i27.photobucket.com/albums/c193/416exmx/MVC-022S.jpg
http://i27.photobucket.com/albums/c193/416exmx/MVC-009S.jpg

[Insanity18]

Chassis | Suspension | Controls:

Frame: TRX450R
A Arms: BURGARD +2 HD
Swingarm: STOCK WITH PC
Steering Stem: STOCK WITH PC
Stbilizer: N/A
Axle: STOCK WITH PC
Carrier: STOCK
Locknut: DURABLUE POSI
Hubs F|R: STOCK WITH PC
Bars: PRO TAPER ATV
Throttle/Clutch Lever: STOCK
Grips: SPIDER
Nerfs: AC PRO PEGS WITH PC
Bumper: BLINGSTAR JOHN NATALE WITH PC
Grab Bar: STOCK WITH PC
Front Shocks: STOCK REVALVE AND SPRUNG
Rear Shock: STOCK REVALVE WITH GTTHUNDER MX LINK
Brake Lines: STOCK
Rotors F|R: STOCK
Rims F|R: STOCK FRONTS, ITP BEADLOCKS ON REAR
Tires F|R: KENDA KLAWS



Body:

Plastic: STOCK BLACK
Graphics|Seat Cover: STOCK
Number Backgrounds: ATTACK
Handguards: POWERMADD
Bar Pad: PRO TAPER
Fuel Tank: STOCK



Engine|Drive System:

Cylinder|Head: STOCK
Bore & Stroke:
Displacement: 450
Cam:HOTCAMS STAGE 2
Carburetor: STOCK
Air Filter|Box: K&N WITH STOCK AIRBOX NO LID
Pipe|Silencer: CURTIS SPARKS FULLL SYSTEM WITH PC
Clutch|Plates: STOCK
Gearing F|R: 14/38
CDI|Killswitch: PRO DESIGN
Cooling: ENGINE ICE
Other:NOSS MACHINE CASE SAVER

PICS BELOW


__________________

[Insanity18]

pics

[Insanity18]

ANOTHER

[Insanity18]

MORE

[420yfz]

Chassis | Suspension | Controls:

Frame: painted lime green
A Arms: lonestar +2+1 long travel
Swingarm: houser
Steering Stem: houser+2
Stbilizer: denton
Axle: durablue
Carrier: hermann
Locknut: durablue
Hubs F|R: stock
Bars: tag
Throttle/Clutch Lever: stock
Grips: spider
Nerfs: dg
Bumper: ac
Grab Bar: ac
Front Shocks: elka elite
Rear Shock: elka elite
Brake Lines: stock
Rotors F|R: stock
Rims F|R: hiper
Tires F|R: itp



Body:

Plastic: painted black
Graphics|Seat Cover: spastic/gytr
Number Backgrounds: sid sells sign
Bar Pad: tag




Engine|Drive System:

Cylinder|Head: port and polish
Bore & Stroke: stock
Displacement: stock
Cam: hotcams
Carburetor: stock
Air Filter|Box: ron woods k/n
Pipe|Silencer: tc
Clutch|Plates: hinson
Gearing F|R: 14 38
CDI|Killswitch: dynatek/pro design

http://i107.photobucket.com/albums/m287/420yfz/rob4.jpg
http://i107.photobucket.com/albums/m287/420yfz/rob2.jpg
http://i107.photobucket.com/albums/m287/420yfz/100_1037.jpg
http://i107.photobucket.com/albums/m287/420yfz/100_1038.jpg
http://i107.photobucket.com/albums/m287/420yfz/100_1039.jpg
http://i107.photobucket.com/albums/m287/420yfz/100_1044.jpg
http://i107.photobucket.com/albums/m287/420yfz/060519006.jpg
http://i107.photobucket.com/albums/m287/420yfz/rob1.jpg
http://i107.photobucket.com/albums/m287/420yfz/Pat_sDigitalPhotos016.jpg
http://i107.photobucket.com/albums/m287/420yfz/rob1.jpg
http://i107.photobucket.com/albums/m287/420yfz/thPortElgin09222006343.jpg

[xsr_racing28c]

Chassis | Suspension | Controls:

Frame: Herrmann Gusseted Frame
A Arms: Herrmann +2 Long Travel
Swingarm: Herrmann +0 Roundhousing
Steering Stem: Herrmann +1 AntiVibe
Stbilizer: N/A
Axle: DuraBlue X-33
Carrier: Herrmann Billet w/ Herrmann Billet stayplate
Locknut: Herrmann Billet Antifade
Hubs F|R: Hardkor Engineering Front and Rear Anodized Gold
Bars: Pro Taper –Windham Bend
Throttle/Clutch Lever: TerryCable/ Works Connection
Grips: Scott
Nerfs: Ac Propegs relocated
Bumper: Pro Armor Mx
Grab Bar: AC Grab bar
Front Shocks: Custom Axis PiggyBack Titanium (Prototypes) Hi/Lo, Comp, Rebound
Rear Shock: Custom Axis Dual Rate /Dual Adjust
Brake Lines: Streamline Stainless
Rotors F|R: Galfer Wave Rotors/Galfer Wave Rotor
Rims F|R: Hiper Beadlock/ Hiper Dual Beadlock
Tires F|R: Maxxis Razr Mx/ Maxxis Razr Mx

Body:

Plastic: Maier Black
Graphics|Seat Cover: Quadtech Humpseat
Bar Pad: Pro Taper
Fuel Tank: LightSpeed Carbon Fiber

Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 439 cc
Cam: cam modification
Carburetor: Sudco FCR 41 mm Mx Carb / Quickshot/ Carbon Fiber Cover
Air Filter|Box: K&N Filter w/Outerwear / CFM Aluminum Box
Pipe|Silencer: Pro Circuit Titanium 4
Clutch|Plates: Hinson Basket, Hub, and Plates
Gearing F|R: stock
CDI|Killswitch: Pro Armor
Cooling: Intense Fabrication Radiator
Extra: Dynatek Programmable Ignition

Extras: Lightspeed CarbonFiber Side Panels, PC Carbon Frame Guards, Pc Carbon Coolant Bottle Cover, PC Carbon Induction System, Hardkor Blockoff plate, Harkor Reservior Cover, Works Connection Engine Plugs, Boyessen Waterpump, Ready Racing SS oil filter, 321 Carbon Fiber Gas Cap …Tooo much more to List!!!!!!

http://img.photobucket.com/albums/v622/xsr_racing28c/qotm4.jpg

http://img.photobucket.com/albums/v622/xsr_racing28c/Qotm1.jpg

http://img.photobucket.com/albums/v622/xsr_racing28c/qotm2.jpg
http://img.photobucket.com/albums/v622/xsr_racing28c/qotm3.jpg

[RaptorRacer45]

Chassis | Suspension | Controls:

2007 Yamaha Raptor 700r

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stbilizer: None
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Tag T2
Throttle/Clutch Lever: YFZ
Grips: Spider
Nerfs: None
Bumper: Pro armor XC
Grab Bar: Stock
Front Shocks: YFZ
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: ITP GP (not shown), OMF
Tires F|R: Maxxis Razr2, ITP HD (Maxxis razrs)



Body:

Plastic: Stock
Graphics|Seat Cover: Stock
Number Backgrounds: Custom
Handguards: Cycra Pro bend
Bar Pad: Factory Effex Yamaha
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 686cc
Cam: Stock
Carburetor: EFI
Air Filter|Box: No Toil, Stock
Pipe|Silencer: HMF
Clutch|Plates: Stock
Gearing F|R: 14/38
CDI|Killswitch: Pro design
Cooling: Stock
Other: Pro Armor Chassis and Swingarm skids and Footpeg extensions....GYTR Radiator guard and A arm guards, Custom american Flag Shock Covers


http://i17.photobucket.com/albums/b89/Naugle45/700r008-1.jpg

http://i17.photobucket.com/albums/b89/Naugle45/700r007-2.jpg

http://i17.photobucket.com/albums/b89/Naugle45/700r013-1.jpg

http://i17.photobucket.com/albums/b89/Naugle45/700r005-1.jpg

[korniev]

Engine:

ProCircuit Titanium TI4 Exhaust
GYTR Jet Kit
Twin Air filter

Front Suspension:

Laeger's Long Travel +3 A-Arms
Motowoz Triple Ajust. Front Shocks (Triple Adj)
Houser +2 Steering Stem (with clamps)
Pep Steering Damper

Rear End and Suspension:

Motowoz Double Adjus. Rear Shock
Elka Rear Linkage
LSR Axcalibar Axle
JT Rear Sprocket (37 teeth)
ITP 19' MXR 4 Tires

Sport Body

AC Stadium Front Bumper
DG fat series rear Grab Bar
Maier Race-Cut Front fender
White Brothers Nerf Bars


Controls:

Motion Pro Vortex Throttle
Renthal Fat Bar with blue center
Scott Grips
Tech Spec Rubber covers
EastCoastATV Graphic Kit and cover




http://i133.photobucket.com/albums/q71/korniev/IMG_0045.jpg
http://i133.photobucket.com/albums/q71/korniev/DSC_0480.jpg
http://i133.photobucket.com/albums/q71/korniev/DSC_0482.jpg
http://i133.photobucket.com/albums/q71/korniev/DSC_0492.jpg

[hondarider110]

you should turn this into a poll in a couple of days..

korniev im digging the motowoz shocks one of the best shocks out there

[TheFontMaster]

Originally posted by hondarider110
you should turn this into a poll in a couple of days..


Thats the idea of the contest:p

[mic 902]

Chassis | Suspension | Controls:

1999 416EX

Frame: Stock, Bare Performance Gusseted
A Arms: Custom
Swingarm: Roll Design -.25
Steering Stem: Herrmenn Racing
Stbilizer: Elka System 3
Axle: Dura Blue
Carrier: RPM
Locknut: Stock
Hubs F|R: Stock
Bars: Pro Taper, Pastrana Bend
Throttle/Clutch Yamha Tri-Z trike throttle, Banshee E-Z pull Clutch Perch/Lever
Grips: Pro Grip
Nerfs: DG
Bumper: DG
Grab Bar: Stock
Front Shocks: TCS Tripple rate
Rear Shock: Stock, TCS kit, Dual rate
Brake Lines: Braided Lines
Rotors F|R: Stock
Rims F|R: Douglas Yellow Label Beadlocks
Tires F|R: Kenda Klaw



Body:

Plastic: Maier, White front, Black rear
Graphics|Seat Cover: Bomb Squad Graphics, Gripper seat cover
Number Backgrounds: none
Handguards: none
Bar Pad: Renthal
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Wiseco Big bore
Displacement: 416cc
Cam: Hotcam Stage 1
Carburetor: Modified stock
Air Filter|Box: No Toil, Stock
Pipe|Silencer: Sparks X-6
Clutch|Plates: Barnett, Dirt Diger Cluth
Gearing F|R: 15/38
CDI|Killswitch: Pro design
Cooling: Stock
Other: Flowed Head.


http://i60.photobucket.com/albums/h30/mic902/Ridetime3.jpg

http://i60.photobucket.com/albums/h30/mic902/Dampner1.jpg

http://i60.photobucket.com/albums/h30/mic902/DONE-2.jpg

http://i60.photobucket.com/albums/h30/mic902/DONE-1.jpg