PDA

View Full Version : Dinli won't start



lurid
01-16-2007, 10:08 AM
My son's Dinli 90 w/ pipe, jetting and no oil injection will not start. We were ridding at the dunes and it just died and would not fire back up. I towed him back to camp about a mile away. so it ran fine for a mile.

I have cleaned the carb, checked the reeds, changed spark plug, checked spark, check float, unplugged electric choke, checked gas lines, tried starting fluid, still has compression, pipe is not plugged. it started doing this 2 weeks ago and I checked everything as well and it started running fine again, but this time no go.

thanks in advance

I've been a lurker for awile and this site has help me out by reading others posts.

lurid
01-30-2007, 09:48 AM
bump

ww228king
01-30-2007, 10:22 AM
if it dont start with starting fluid then you have no fire....

markvette
01-30-2007, 11:47 AM
check spark again. if none its probably the stator or cdi. usally when a stator goes it is all at once nut a cdi will go back and forth till it goes all the way out.

Mark

also check all your grounds

lurid
01-30-2007, 01:06 PM
thanks. I was thinking it was maybe a crank seal. I have spark from old plugs and new plugs. I had to give up and take it in, so I hope I don't regret it