quick question!

[Sjorge450R]

I just rejetted my R and I forgot to be careful when I was taking the carb off. Where does the smallest crankcase breather line go?

Steve

[ghott]

I believe the smallest line comes from the valve cover down into the "Breather-T."

Is this the line you are referring to?

Just to clear things up....

One line comes from the valve cover down into the TOP of the "T." One very short line comes up from the crank case and into the BOTTOM of the "T." And the last line comes out of the SIDE of the "T" and runs back to the airbox for venting.

Hope this helps.

[Sjorge450R]

Originally posted by ghott
I believe the smallest line comes from the valve cover down into the "Breather-T."

Is this the line you are referring to?

Just to clear things up....

One line comes from the valve cover down into the TOP of the "T." One very short line comes up from the crank case and into the BOTTOM of the "T." And the last line comes out of the SIDE of the "T" and runs back to the airbox for venting.

Hope this helps.

no its the tube thats all by itself. Its near the rear of the motor. If someone has a picture of there 04/05 with the carb attached it would help. I have a pic of the line, but i hate Kodak easy share, I can never upload the pics from the camera.

[ghott]

No hoses from the carb attache to the Crankcase breather.

[Sjorge450R]

Originally posted by ghott
No hoses from the carb attache to the Crankcase breather.

damn, let me get a pic then.

[Sjorge450R]

here it is!

[Sjorge450R]

Originally posted by honda4life72
http://www.putfile.com/pic.php?img=4521995

haha thanks alot. I thought it may have gone there too....lol. So there are just like 3 opening on the carb that no hoses get attached too but looks lik ethey do....thanks.

[honda4life72]

http://i136.photobucket.com/albums/q173/honda4life72/1-15-06_003_small.jpg

[ghott]

Sorry I didn't get to your PM's sooner SJorge.

[ShiftFMX]

Yeah, Just shove your tube in that hole :p ;)

[Sjorge450R]

haha thanks for all of the help. got her back together and she runs A LOT beter than stock with just moving the e-clip on the needle down one slot.

[honda4life72]

are u running a stock pipe and filter? what is your setup ...motor wise

[Sjorge450R]

HRC end cap

it was popping on decel. And Colby reccomended a larger main so i bumped it up to a 122 (i had to laying around from my 300.....lol)