PDA

View Full Version : Lobo Trx 250r Frame Trx 450r Motor!



ducquad
01-14-2007, 10:35 AM
OK!! Guys!I am installing a trx 450r motor on my 2002 Roll Design lobo frame!the problem Iam finding is that it sits real high on the frame,it wil be hard to install the gas tank.Any suggestions?????

ss440ex
01-14-2007, 10:51 AM
I have install .100 washer spacers under the rear fuel tank mounts on the 400ex/yz conversions.

Helps keep the petcock fuel line off the top of the carb...

Hope that helped, are you needing more room ???

matt250r21
01-14-2007, 04:27 PM
Try a 2000 CR80 gas petcock if you are having problems fitting the tank. This moves the on off switch under the tank and has a lower profile then the stock 250R petcock. Might give you the room you need.

ducquad
01-14-2007, 04:33 PM
Well, I got to install the swingarm bolt thru the motor,but now I have no room to install the carb on the motor!?!?!?might have cut the shock stay to make room,what a pain in the *****$$$$ this has been!:grr:

ducquad
01-14-2007, 04:36 PM
Also will have to cut he swingarm cause the 250r I had did not go thru the arm,had a separate rear bolt!

AtvMxRider
01-14-2007, 04:59 PM
Originally posted by ducquad
,what a pain in the *****$$$$ this has been!:grr:


Thats why they are called hybrids :devil:

cbr
01-14-2007, 07:33 PM
show us some pics during your build and when your done if you could. i love the roll design frames, wish they made aftermarket ones for crf, yzf,and ktm's!

ducquad
01-14-2007, 08:19 PM
sOUNDS GOOD ON THE PICS,RIGHT NOW i AM DONE FOR THE DAY!!!!!!WILL POST SOON!

figair
01-15-2007, 11:10 AM
Originally posted by AtvMxRider
Thats why they are called hybrids :devil:

Thats right,but you will have one bad boy when you are done,I wouldve went w/the crf450 motor though..

ESrider
01-19-2007, 02:37 PM
Any pics yet?

ESrider
01-19-2007, 02:37 PM
Any pics yet?

ESrider
01-19-2007, 02:37 PM
Any pics yet?

greenman
01-22-2007, 03:16 PM
any pics:devil:

ESrider
01-22-2007, 03:31 PM
Sorry I didn't realize I replied three times in a row.

ducquad
01-22-2007, 09:50 PM
PICS coming soon,still being worked on!!!:D

loboboy
01-23-2007, 07:37 AM
sorry to say this but IMO I would not cut, weld or do anything to that chassis. Do you realize how rare these are? plus the original cost was thru the roof. I would leave it a 250R Lobo Chassis and buy a fricken 450.

I would never de-face a lobo chassis, they are the best that was ever made IMO.

QuadRacer041
01-27-2007, 08:55 AM
Originally posted by AtvMxRider
Thats why they are called hybrids :devil:


actually not really.....if your building a hybrid with the correct frame they will out perform a production bike anyday. when you are trying to do what this guy is then sometimes you have problems.

actually DUC, seems like maybe you should have researched this a little more. putting a 4 stroke motor in a 2 stroke frame usually never works because of the motor heights. most people building hybrids use the 400ex frame for that reason. i have seen pictures of people who have done it and from what ive seen it never comes out good. im sure cutting things that you will need to cut weakens the frame and probably you will affect the handleing as well. the air boot is also a big issue. even on the 400ex frame you need to do some reworking. on all the aftermarket hybrid chassis, the rear shock is moved over to the right slightly to make it work.
it seems you have already started cutting this chassis apart so it looks like there is no turning back now....good luck.

ducquad
01-27-2007, 09:23 AM
Yes! you are correct,the frame is different than the 4 strokes and yes it is going to be weaker than when it was built and yes I may be defacing a work of art!(roll design) and it will be a pain in the ###@@@!
BUT!! when it is done,this will be a awsome quad,great chassis great motor and having all the good components this will be one sweet hybrid.
Sorry guys for defacing a classic,this bike was my dream bike,but the 2stroke days are pretty much over and for the riding I do it will work perfect.
Maybe if things go well I will race it in the baja 500!!!!
'Beat to fit!
Paint to match!!:D

Ex_Rider43
01-28-2007, 12:57 PM
These lobo chassis were so expensive back in the days , your cutting it and ''fitting'' a trx motor in it ?? Id never do such a thing , I know someone who put a crf in a LSR 250r frame and its ugly for sure.

Heres Jasmin plante walsh CRF that he used to race the nationals with in 03.

Ex_Rider43
01-28-2007, 12:58 PM
These lobo chassis were so expensive back in the days , your cutting it and ''fitting'' a trx motor in it ?? Id never do such a thing , I know someone who put a crf in a LSR 250r frame and its ugly for sure.

Heres Jasmin plante walsh CRF that he used to race the nationals with in 03.

Mean250r
01-28-2007, 01:46 PM
Originally posted by loboboy
sorry to say this but IMO I would not cut, weld or do anything to that chassis. Do you realize how rare these are? plus the original cost was thru the roof. I would leave it a 250R Lobo Chassis and buy a fricken 450.

I would never de-face a lobo chassis, they are the best that was ever made IMO.

im gunna agree. you shulda sold the chassis and bought like a LSR chassis ment for that motor. Its yours tho.

korniev
01-29-2007, 06:42 AM
Originally posted by Ex_Rider43
These lobo chassis were so expensive back in the days , your cutting it and ''fitting'' a trx motor in it ?? Id never do such a thing , I know someone who put a crf in a LSR 250r frame and its ugly for sure.

Heres Jasmin plante walsh CRF that he used to race the nationals with in 03.


WOW MAN THIS IS a SICK HYBRID! I absolutely love it

korniev
01-29-2007, 06:42 AM
Originally posted by Ex_Rider43
These lobo chassis were so expensive back in the days , your cutting it and ''fitting'' a trx motor in it ?? Id never do such a thing , I know someone who put a crf in a LSR 250r frame and its ugly for sure.

Heres Jasmin plante walsh CRF that he used to race the nationals with in 03.


WOW MAN THIS IS a SICK HYBRID! I absolutely love it

cbr
01-29-2007, 03:17 PM
that looks like a walsh frame and s.arm.

Mean250r
01-29-2007, 03:39 PM
Originally posted by cbr
that looks like a walsh frame and s.arm.

most likely being its a walsh CRF hybrid :D

4oomarc
02-05-2007, 10:19 AM
Originally posted by Mean250r
most likely being its a walsh CRF hybrid :D

most likely its a walsh CRF hybrid that sleeping in my garage :D

slipperyjake
03-24-2010, 11:44 AM
This is my roll design lobo with a ktm 250f motor in it.roll design lobo (http://s1026.photobucket.com/home/dougroll4/index)

protraxrptr17
03-24-2010, 02:24 PM
What are you doing? This is like the fourth old thread you've dug up.

250x_kyle
03-25-2010, 03:35 PM
Originally posted by protraxrptr17
What are you doing? This is like the fourth old thread you've dug up.

and all to post a link to the thread he created

extremetrucker
03-26-2010, 12:08 AM
he's still waitin for pics of the 450 in the lobo lol

brewster426
03-31-2010, 06:05 PM
i read somewhere that people are lowering the bottom frame rail 2 inches in order to keep the motor from hitting the gas tank.