need some dimension

[Project300EX]

I sent off money today for a 450r swingarm for my 300ex project. My bottom end is arriving monday and as soon as I get it I want to mock it up and get everything welded up so I can get the frame painted and piecing it back together. I need a few dimensions so I can get everything welded. First I need to know the three dimensions in the pic. It's pretty much the width of each solid part of where the pivot bolt goes and also the distance between them. The other dimension I need to know is the width of the frame mount for the linkage and how far the hole has to be from the frame. The info will be greatly appreciated and will definatly help me out a lot in my project progress. Thanks.

[Project300EX]

http://i67.photobucket.com/albums/h284/RedNoma/untitled.jpg

[Project300EX]

bump for info

[Project300EX]

Somebody?

[Carlock # 33]

hey it is 2 7/16 and 4 9/16 and 2 7/16

[Project300EX]

Originally posted by Carlock # 33
hey it is 2 7/16 and 4 9/16 and 2 7/16

Thanks man. I just got my bottom end in and thought I was going to have to wait for the swingarm to come in. I don't think the mail ran today so it will probably be around thursday before the mo gets to you, since it was sent saturday. Again thanks for everything.

[Carlock # 33]

no problem but dont forget about the dust caps because that will add a little length too

[Smidgy]

I am not sure how exact you have to be, but those dimensions are probably metric just like everything else on the bike, so it will not be right on 2 7/16 & 4 9/16 & 2 7/16. Just a heads up.