help me put a price on this R

[the glassman]

i have this thing and i would rather have a newser ute. So help me put a value on it so i can sell it to some one who would appreciate it more.:)
http://www.imagestation.com/picture/sraid222/pce1908d29d63a75cff059d0a9ef7bbbd/eb1f0b65.jpg
http://www.imagestation.com/picture/sraid222/pfe7c4529e4155bea113dc1df0d4bf178/eb1f0cb6.jpg
http://www.imagestation.com/picture/sraid222/p909461b66cdfe09d9a8561264292b781/eb1efd96.jpg
http://www.imagestation.com/picture/sraid222/p3ac075a89ea63e4d3e79e607be53a1d9/eb1efcd1.jpg
http://www.imagestation.com/picture/sraid222/pbb9e262c169d6b0a10c7517c70c92533/eb1efd43.jpg

Kinda rough but it does run good.

specs:
86 square tube frame uncut,unaltered p/ced grey( needs redone)
86 atc motor,rear swinger,axle,brake,shock and wiring harness
400 ex front arms,tie rods,hubs brakes and shocks
protaper bars
ac propegs/nerf bars
russel front and rear stainless brake lines new pads on rear

motor is on stock bore(not garrunteed but pretty sure) starts on second kick runs good.
not sure on the pipe but it works
bike seems to work good but needs some tlc...
the plastic and tank are 300ex that i put on so i could ride the thing ,the frame was not cut in any way to do this. It will need a tank and plastic.
I dont really know that much about these so sorry if i miss something..
I am trying to get a utility to race with so i need to sell this and i dont really want to ebay it if i dont have to......eddie

[patnode]

THE FRAME IS A 1988 OR 1989

depends on area, id say around 2 grand give or take a lil

[the glassman]

Originally posted by patnode
THE FRAME IS A 1988 OR 1989


good to know thanks.:) told you i didnt know much about these...lol

[the glassman]

the bike is in tx but i could box it up to ship if nessissary

[GPracer2500]

Not that it really matters, but that engine looks like an 85. The carb is 85 for sure.

[312R1]

I would say $1,000 - $1,500 because it looks like it was just thrown together.

[the glassman]

Originally posted by GPracer2500
Not that it really matters, but that engine looks like an 85. The carb is 85 for sure.

lol ok
sorry ill get it right :D
when i got it it was in a lot of boxes and the motor was in a atc chassis but the head tube had been ripped off in a crash so i didnt have it to be sure.

any one want this thing im a motivated seller;) if i keep it i will sell the motor and do a hybrid:devil:
my son wants to put his modded 300 ex motor in it for himself

[the glassman]

Originally posted by 312R1
I would say $1,000 - $1,500 because it looks like it was just thrown together.

It basically was so that i could make sure it runs and everything works before i tryed to sell it

[iamjasyn]

Hi Glassman. It's definetely an ugly guy. I don't know if you'd get 2000k as it sits, But if you spent some cake on good used or new oem R plastics and graphics and a used seat, I think you would get $2500. It's an 88 frame by the way. 89 has a bolt hole on teh subframe for heel guards.

You know, come to think of it, you're missing a handful of stock parts to make it look like an R... I dunno. You might actually do best parting it out...

[lbz#7]

Originally posted by the glassman
i have this thing and i would rather have a newser ute. So help me put a value on it so i can sell it to some one who would appreciate it more.:)
http://www.imagestation.com/picture/sraid222/pce1908d29d63a75cff059d0a9ef7bbbd/eb1f0b65.jpg
http://www.imagestation.com/picture/sraid222/pfe7c4529e4155bea113dc1df0d4bf178/eb1f0cb6.jpg
http://www.imagestation.com/picture/sraid222/p909461b66cdfe09d9a8561264292b781/eb1efd96.jpg
http://www.imagestation.com/picture/sraid222/p3ac075a89ea63e4d3e79e607be53a1d9/eb1efcd1.jpg
http://www.imagestation.com/picture/sraid222/pbb9e262c169d6b0a10c7517c70c92533/eb1efd43.jpg

Kinda rough but it does run good.

specs:
86 square tube frame uncut,unaltered p/ced grey( needs redone)
86 atc motor,rear swinger,axle,brake,shock and wiring harness
400 ex front arms,tie rods,hubs brakes and shocks
protaper bars
ac propegs/nerf bars
russel front and rear stainless brake lines new pads on rear

motor is on stock bore(not garrunteed but pretty sure) starts on second kick runs good.
not sure on the pipe but it works
bike seems to work good but needs some tlc...
the plastic and tank are 300ex that i put on so i could ride the thing ,the frame was not cut in any way to do this. It will need a tank and plastic.
I dont really know that much about these so sorry if i miss something..
I am trying to get a utility to race with so i need to sell this and i dont really want to ebay it if i dont have to......eddie 1,000

[JxxxOxxxE]

Where's cleburne, tx? I might be interested in buying it from you, depending on what you end up asking...




EDIT....I saw that its just a little a little south of Fort Worth...Shoot me a price...

[honda350r]

I would have a hard time giving 500.00 !

[Creech52]

Its ugly but its got some worth while parts, like the frame and the motor. and decent 300EX plastics and some other nick nacks, Im with the parting it out crowd, your probably looking at better money that way. Or fix it up a little and make look more like an R and you could get somewhere in the 2k range. Just wondering considering its an 88-89 frame with an atc swinger did you use some sort of spacer tube on the swingarm considering it doesnt have the motor mount tube there.

[richiesq75]

the lawnmower is in better shape than that r

[JxxxOxxxE]

glassman, I responded to your PM...

[the glassman]

thanks for all the offers and the input :)
Ive just sold my jeep so i think im going to tear it apart and sink some cash into it and learn how to ride a 2 stroke instead of a 4 stroke.

[JxxxOxxxE]

Originally posted by the glassman
thanks for all the offers and the input :)
Ive just sold my jeep so i think im going to tear it apart and sink some cash into it and learn how to ride a 2 stroke instead of a 4 stroke.


thats cool...if you change your mind about anything, just PM me and let me know. I'd still be interested in buying it...

[the glassman]

not a problem .
im going to try to race cross country so we will see:D

[blaster 240cc]

:confused: eh weres the fuel tap on this R? good luck with it 4 the future ;) nick.