thump4863 parts on the way

[thump4863]

Pappy,

Sending out my parts to you tomorrow -

There is a complete list in the box along with my address. Its mostley small parts the biggest item is my subframe. I have included my JB stem for you to match the color as close as you can. When your done let me know the name of the color so I'll know in the future.

I'm including 2 new front hubs that came with the bearings already in there. I tried on one of them to get the bearings out and I couldnt. I think I screwed up the little spacer in between the two. Can you remove the bearings and check that and if it needs replaced - replace it? Also if you dont mind installing the bearings back.

Last thing - I know you have a 2 week turn around but if you can get mine a little quicker I will gladly pay a rush charge - I didnt think JB would take this long to get me my stuff and i'm on a time line (its crazy when you get a set of PEPS before your JB stuff when you ordered the PEPs a week after you order your components). Just pm me the final price once you get my box and I'll send payment via paypal.

Thanks,
Seth

[Pappy]

I try and not rush, but I will do my best to get you a quick turn around.

[thump4863]

Thanks for your help - also forgot to mention the color that JB goes by is Trans/Candy Blue but they wouldnt tell me which brand or the exact color it was.

[thump4863]

Hey pappy - I forgot a part that i want to get powdercoated - I'll ship it out tomorrow USPS Prioriy mail - Its a PEP rear ressie bracket. Thanks again.

Seth

[thump4863]

Pappy just making sure you got both my boxes. You should have gotten the 2nd one either yesterday or today. Let me know when you finish up and I'll send you payment. Thanks again.

Seth

[Pappy]

what name should i be looking for on the box?

[thump4863]

Seth Knight from Jacksonville, AR both came USPS Priority Mail

[Pappy]

I just checked the shop and saw nothing, however if you sent them after the 10th it would be about right for them to arrive anyday coming from your state.

I will also get a slip to go pick them up because I have it set up so that no boxes will be left at my mailbox (1/2 a mile from the front door) so I will run and get the mail tomorrow to see if there is indeed a pick up slip for me.

[thump4863]

I shipped the first one on Friday last week and the other Tuesday. I just tracked them - 1st one was delivered Thursday the 2nd one arrived today.

[Pappy]

they may have arrived at the post office, but they are not in my possesion. They will be waiting for me if it states they have been delivered.

[thump4863]

k sounds good let me know if they aren't there when you pick up the stuff from the post office. Thanks again for your help - look forward to seeing your work in person! :)

[Pappy]

no prob, and i know you'd like a quick turn around so I will do my best for ya.

i asked the wife and she said she did not get the mail thursday or friday or saturday:p (she had surgery on her mouth thursday afternoon so I did not slap her around, but I did tell her YOU were disappointed with her:eek: :devil: )

[thump4863]

:eek: Not me!!! I was just making sure you got them!!! Lot of money in those boxes to just walk away from the post office - You don't have to worry I wont ask where you are every 6 hours on my parts - i'll get them when I get them! :cool:

[Pappy]

I went out to move the wifes truck and what did I find:confused: a big box that i assume is your subframe. bridget doesnt remember even picking it up on her way to her doctors appointment...lol (poor girl harldy takes asprin and they doped her up real good for her surgery..lmao)

[thump4863]

Wow they must have doped her up good! That is all my stuff - the 2nd box just has a PEP rear ressy bracket.

[Pappy]

Originally posted by thump4863
Wow they must have doped her up good! That is all my stuff - the 2nd box just has a PEP rear ressy bracket.

for her mistake, i am making her strip your parts:devil:

[thump4863]

Haha - well shouldn't be that hard to strip almost all the parts were brand new! Have you had a chance to look at that one hub. I'm curious if I screwed up that middle spacer between the two bearings.

[Pappy]

I saw where you whacked the aluminum, but I dont think it will create any problems

[thump4863]

k good deal - thanks

[Pappy]

..

[Pappy]

.,

[thump4863]

AWESOME!! :eek2: Let me know how much I owe you and I'll send you paypal :)

[Pappy]

no worries, i am still waiting on the subframe to come back from stripping, and i have to do the valvecover and moly the small parts, but getting close

[thump4863]

Also what color did you use? Looks like a great match.

[Pappy]

candy blue translucent

[thump4863]

Well thats what they said they used I just thought candy blue was one color and trans blue was another.

[Pappy]

valve cover

[thump4863]

nice :)

[Pappy]

calipers are now apart, and i have an entire batch of calipers to work through so they should be done shortly.

[thump4863]

Sounds good!

[Pappy]

calipers

[Pappy]

subframe

[thump4863]

Looks good! Were you able to get my smaller parts shipped out today?

[Pappy]

no i sure didnt. i read your pm and it was past the cut off tiem for me to ship today. im getting ready to print you up for tomorrows run, ill take a look at what i can do to get them there quicker

[thump4863]

Well its ok - just ship ground cause the only way to get her Friday is overnight - unless you can ship Fedex with Saturday home delivery. But if not anytime next week will be fine.

[Pappy]

all packaged up and ready to roll out. monday or tuesday arrival via DHL. even with 2nd day it was still monday or tuesday

19902634253

[Pappy]

cody was throwing trash away and decided to go through the box you sent because of all the newspaper in it. he found 2 small parts, a bushing for the swing arm and a small clamp bracket. i dont recall seeing either on your list but they easily could have been placed in there by mistake. let me know so i can mail these out.

[thump4863]

Originally posted by Pappy
cody was throwing trash away and decided to go through the box you sent because of all the newspaper in it. he found 2 small parts, a bushing for the swing arm and a small clamp bracket. i dont recall seeing either on your list but they easily could have been placed in there by mistake. let me know so i can mail these out.

Hmm - not sure if they are mine - I already have my swinger installed and not missing a bushing. As far as the small clamp bracket - if its mine I'm sure I have a ton of those so I would say not to worry about it! Who knows it probably fell in box.

[Pappy]

ok just wanted to make sure!!!

[thump4863]

Got my box yesterday - and already went to town installing. One thing is the box was ripped open with my stem hanging out. Luckily everything was there and fine.

I can't even begin to tell you how much your pc looks compared to the other stuff I have. Top notch quality! I'll post some pics once its completed. Thanks again!

[Pappy]

glad everything was ok with teh stem. i had an axle show up here last week that was half out of the box:ermm:

post up some pics when you done!

[thump4863]

Pappy -

The replacement hub should be on your front door. Let me know when you knock it out and how much I owe you. If you ship it after Tuesday ship it 2nd day for me. Thanks again.

[Pappy]

yep i have it here. just cover the shipping and im good:)

[Pappy]

please pm me your address!

[thump4863]

sent you a pm!

[thump4863]

Got the hub today - thanks pappy!

Already got it on - heres a sneak peek of the quad

http://img.photobucket.com/albums/v160/thump4863/Rebuild/100_2746.jpg

[Pappy]

now thats badass!

[thump4863]

Completed

http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture268.jpg

Rebuild thread
http://www.exriders.com/vbb/showthread.php?s=&threadid=283848



Thanks pappy! Couldn't have done it without you :D