HiPer Rim Lug Nuts Tapered or Flat?

[hornetgod13]

I'm getting a set of rims soon and I have a couple questions. Hopefully a few lucky HiPer rim owners can help me out.
HiPer Rim lug nuts a sopposed to be flat right? Do I need to put a washer between the lug nut and the rim?

[procircuit406ex]

If im not mistaking then yes your right but Im not 100 percent sure...

[bradley300]

get lugnuts for a stock blaster, they are the kind you need. they ar 17mm at the base, but only 14mm at the head where the socket sits

[svahle]

Mine require flat lug nuts. Just turn the tapered nuts around and put the tapered side out. I use washers on mine just to be safe.

[deathman53]

I have no problem with reversed stock honda lugs on mine. Most 17mm sockets fit fine.

[Punk'd]

I just reversed my stock lug nuts and put a washer in.

[nicker71]

my stock yfz lugs were fine. Make sure you have a 12 point 3/8 s socket for the ring bolts. I had a hard time finding one.

[hornetgod13]

Thanks to everyone for your input. I took your advice and went with an oversized flat face lug nut. I like the added surface area to hold the rim in place. They were only $1.00 a piece at www.rockymountainatv.com