PDA

View Full Version : need some advice



"THE ShoP"
01-05-2007, 12:36 AM
I have a yosh slip on,powerbomb header,an a k&n filter,what jetting should I be running??

rite now I'm running stock 148 main an 42 pilot

SORRY....I know theres a thousand post of this

interceptorz28
01-05-2007, 05:49 AM
try a 155. they are easy to swap.

winot01
01-05-2007, 11:28 AM
At my elevation I am running a 152 main and a stock pilot jet, with my current mods my 400 runs just a bit on the rich side.

"THE ShoP"
01-05-2007, 12:00 PM
i just put a 150 in it that i had lying around an it bogs out at low rpms? seems like its drowning out should i adjust the slide or the air/fuel screw?

01-05-2007, 12:36 PM
roms don't matter, it is throttle position...
0-25% throttle is the pilot jet
20-80% is the needle
75-100% is the main jet...

notice i have some overlap there, and those are just guideline percentages, it may be a little different...

"THE ShoP"
01-05-2007, 12:49 PM
say I'm goin kinda slow in 2nd gear an i punch it, it bogs out?

hornetgod13
01-05-2007, 01:44 PM
Pull the air box lid off and test ride it. If the condition improves than your set up is too rich. If it worsens that you're still too lean.

Honda#4
01-05-2007, 04:53 PM
put a 155 in and take your lid off.