HingeDisc07
01-04-2007, 06:26 PM
Hello I am desperate for help here
I recently installed a 416 J.E. 10.1 kit, hotcams 2, crf450 cam chain, and 450r carb.
I am running a K180, 3rd notch on needle, 48 pilot, and 2.5 turns on fuel screw. Here is what I need help with:
1) First, when I turn the 4 wheeler on it IDLES REALLY HIGH. I tried adjusting the throttle cable, but all that did was lower the rpms (but not enough) and it would shut off when you spike the throttle.
2) Second what is the screw that comes out of the carb and has the black spindle? How do you adjust it?
Do I need to go up on the pilot jet?
Thanks for all your help!
I recently installed a 416 J.E. 10.1 kit, hotcams 2, crf450 cam chain, and 450r carb.
I am running a K180, 3rd notch on needle, 48 pilot, and 2.5 turns on fuel screw. Here is what I need help with:
1) First, when I turn the 4 wheeler on it IDLES REALLY HIGH. I tried adjusting the throttle cable, but all that did was lower the rpms (but not enough) and it would shut off when you spike the throttle.
2) Second what is the screw that comes out of the carb and has the black spindle? How do you adjust it?
Do I need to go up on the pilot jet?
Thanks for all your help!