Clutch Lever and Perch Setup

[BadA$$440]

I was wondering what everybody is using? I had the MSR Raptor setup up for a while and the lever and perch broke the other day ( cheap materials ) so i need a new one ( to reduce arm pump also ). I was thinkin bout the Hydraulic clutch but i dont have that kinda money right now. And i also heard good aboout the stock CR250 setup. Let me know what you guys think.

[305exracer11]

i ran a cr125 perch with lever. its a awesome clutch

[Big - D Racing]

I run Works Connection Easy Pull adjust on the fly

im gunna order a PEP soon. ill let u know how it is.

[Knight440]

Can someone tell me what to do with the wires on the stock clutch perch? netral saftey switch? I want to put a works conection perch

[Big - D Racing]

If you like to start your bike in gear by just pulling in the clutch lever, cut the wires and splice them together. Otherwise leave it how the wires are and just tape some eletricel tape around them so it's off to the side, but if you do that you'll have to put your bike in neutral to start it everytime. Basicaly all those wires do is when you pull in the clutch lever it causes the wires to come together and form a comlete circuit to verify the lever is pulled in so it can be started. It helps protect your starter from cranking when your bike is in gear. I connected the wires, so I can start my bike anytime while in gear.

[Knight440]

Thanks Big D :D

[BadA$$440]

How is the EZ pull clutch lever and perch? i might check into getting this setup up.

[Bean]

my cosin has a cr250 clutch lever and perch on his R, and its a good pull, a bit stiff, but its smooth, i DO NOT like pep, it feels very mushy and not responsive, but thats jus MO