Tag T2 Cr Hi Bend ???

[GIXXER1KR]

I put on my new Tag T2 Cr High bend bars and could barely fit the front brake and thumb throttle.Anyone every experienced this.i can not fit handgaurds now either!!!!!!!!

[lumi]

sorry no experience but i want those bars and wanted to ask... are they any higher than stock or wider? im 6'2" so i want high bars... any pics comapred to stock..


thanks alot


-lumi

[GIXXER1KR]

I went with a +1 stem and its a little higher.U should go with cr double high.Its all personel prefference though

[mikesbikes09]

i run taper cr hi (1-1/8 everythign fits fine

[bluebaron]

I have the same probelm with my T2s, i had to get a new perch so i could put my tether on, cuz there was no room before it starts to taper to the thick part of the bars. I want to get some powermadds but i dont know how they would fit, since there is no more room where it is only 7/8s.

[mikesbikes09]

buy some pro tapers i have mosse guards asv lever everything fits 100%

[speedfreaksguy]

I run Tag CR high bend with Powermadd's and I didn't have any problem. I even have a PD tether and a Vortex Ignition switch on my bars with no problems.

[BVRLVR]

Originally posted by lumi
sorry no experience but i want those bars and wanted to ask... are they any higher than stock or wider? im 6'2" so i want high bars... any pics comapred to stock..


thanks alot


-lumi



i run a +2 houser stem with the tag 2 sx bars (99 high / 802 wide) there slightly higher and wider than the CR HI bars (95 high / 795 wide) and with less sweep (54 vs. 62), i think you would be happy with that setup

[thump4863]

Originally posted by GIXXER1KR
I put on my new Tag T2 Cr High bend bars and could barely fit the front brake and thumb throttle.Anyone every experienced this.i can not fit handgaurds now either!!!!!!!!

I have the same bars and everything fit fine - I even had acerbis full wrap handguards on

[lumi]

thanks for the off topic info guys.... appreciate it





-lumi

[Sheepless]

Lumi
Let me warn you. We have 2 guys in our group with the Tag CR hi bend on stock 450r's with basic adapters (one is an 05 and the other is an 06)... those bars are LOWER than stock making them extremely uncomfortable!!!

Now- do u/s some adapters are higher than others, for instance the TT X Bar clamp will make the Tag CR hi bend about stock height.

the tag cr high bend with the trail tech clamp is actually a little higher than stock...lonestar_r runs that set up...

[lumi]

thanks for the input im gonna go with the raptor atv sport bend or the one of the atv bends.... thanks alot...



-lumi

[yfzster]

To let you now,Pro Armor's tether fits down on the fat part of the bars.

[Lonestar_R]

yes I do run the setup speedy spoke about and everything fits fine on mine