10-19-2001, 06:46 PM
I just put on my WB Pro Meg system, also I went with a 170 main (K&N recomendation), and a high flo air filter. I installed the jetting then ran it. It ran fine no problems and plent of power then I slapped on the WB pipe and header and wow what a diff. Thing ran great but I wanted to adjust the air/fuel screw to K&N rec. which was to seat it and 3.5 turns out. After that all went bad, I couldnt get it started unless it was choked. So I turned it in a half a turn and almost, another half and she was running. Can anyone tell me if turning the air/fuel mixture clockwise is richening or leaning? Or what the prob was!