Sending a box out

[EASTHILL]

Pappy,
I have a box of parts on the way.

MOLY COAT
swingarm pivot shaft and nut
2 honda 05 ft. spindles
6 disc rotor bolts
2 spindle nuts
2 6mm honda fasteners
8 steel ft arm bushings
4 swingarm carrier pinch bolts
4 lock washers
2 chain guide bolts with 2 lock washers
4 heel guard bolts w/4 nuts and 8 washers.
2 linkage bolts w/2 nuts and 4 washers
4 foot peg bolts and washers

STEALTH BLACK
2 honda 05 ft hubs
2 tie rods
4 a-arms (ars/fx)
1 swingarm (ars/fx)
2 roll design kick up pegs (polish outside)

If there is a problem with anything or a better choice for the application just let me know.If you could let me know cost wise also that would be helpful.
Thank You Pappy.
Brian Schmid 716-523-9000
Colden,NY

[Pappy]

and a partridge in a pear treee:p

[EASTHILL]

Ha- and on the fourth day of january EASTHILL sent to meeee....
just following your directions.
But I admire your holiday spirit.

Could you provide your address -
I cant seem to find it. Thanks



of yeah - almost forgot
I added a exhaust heat shield to the box to be powdercoated stealth black.

[Pappy]

spindles complete, more curing now

[Pappy]

part of another batch of small parts

[Pappy]

this is the last of the molycoated small parts, there is a few that are nyloc and i cant coat them, however they and the others are in the polisher(reminder to self that you have them in there...lol)

[Pappy]

forgot the pic

[Pappy]

Only thing I am waiting on is the swing arm

[Pappy]

hubs and heat shield

[Pappy]

pegs

[EASTHILL]

looking good -Thanks
I had mentioned I wanted the pegs polished on the outside edges in my first post but Its fine the way it is.
No need to slow down the progress.
Im just going to pound the crap out of them anyway:p

[Pappy]

i seen that, but i thought you were using that as a refernce to what part it was:p i dont do polishing if i can help it:p

[EASTHILL]

pappy,what about my tie rods?

[Pappy]

your tie rods took a slight trip in a box to another member, but are on thier way back to me. everything will be ready to roll out by the end of the week, i just finished fishing out one of your brake rotor bolts that tried to duck me and dove to the bottom of my blast cabinet. Lil sucker didnt wanna get blasted:grr:

[Pappy]

i believe that is the last of the moly work

[EASTHILL]

i figured you might havesome trouble with
johnny #3 brake rotor bolt-
ever since I started using an 18v impact on him hes been a little gun shy :p

[Pappy]

yeah they can be a pain. they use so much loctite on them its scary:p

[EASTHILL]

Pappy, whats your paypal e-mail?
Ill send out payment as soon as you let me know.
Thanks ,Brian

[EASTHILL]

Any word on those traveling tie rods?
:D
Im jest getting a little ansy about reassembling my ride:p

[Pappy]

Your swing arm and tie rods are in the oven as I type this!

[Pappy]

swinger is completed

[Pappy]

19902628955 DHL

all ready to roll out tomorrow

[EASTHILL]

Sounds good-
Thanks again Pappy-send some stickers and Ill be sure to plug BK:macho