PDA

View Full Version : which grab bar makes decent wheelie bar?



soda7o
01-03-2007, 03:11 PM
which grab bar woudl make a decent wheelie bar ... i dont want to get a stutn 12 bar but instead a grab bar to serve as a 12 bar...???

thanks

red4ever
01-03-2007, 07:03 PM
a xc bumper would probably work or a 6 pack rack if its strong enough

Jimmah
01-04-2007, 01:46 PM
Stock... At least on most quads it is steel. You are not going to want to put a aluminum bar on there as it will grind right through it, if it doesn't just snap it off. Stock bars work suprisngly well if you don't slam down on them. Although they will wear out eventually.

chpsk8er630
01-04-2007, 06:07 PM
I like prm grab bars... www.prm-atv.com I have the desert grab bar and mine has held up to alot of abuse and is not worn down that bad and never broke.

jokester
01-06-2007, 01:34 PM
ya these steal stock ones take so much abuse!! But mine is finally starting to get worn down from all the times I've draged it doing highway wheelies. so I've decided that instead of buying another one I'm going to just take my stock grab bar from a 250ex and weld it to the stock one on my 400ex, that way I have even more steel to go through :)

Kaleigh
01-24-2007, 06:23 PM
your best bet is to get someone to weld you a nice strong steel one.. just let them use your stock grab bar and go from there.. you can make it longer if you're having troubles getting your feet in the bar or shorten it if you like to have the quad real far back before you hit the bar..

oh and you can probably get them to weld you a couple for a good price..

f4istunna
01-29-2007, 08:21 AM
+1 on the stock steel, i have a desert alum on my 700r and you have to set it on the bar pretty easy or it bends, cant really do any bartricks for a long period of time or you'll go right thru.

my 400's have steel stockers and you can slam back on them and grind away for quite awhile

cheap too

skater1107
02-08-2007, 08:19 PM
buudy of mine broke his stocker then made one at the shop out of stainless steel he has hit that thing a million times just make sure you upgrade to grade 8 bolts the stockers wont last

moto04racing
03-01-2007, 12:59 AM
i made on for the blaster after i snapped stock and i reinforced the one on the z...

ny300exrider
03-01-2007, 05:14 AM
prm is a great choice....my standard prm is very beefy and works great

bigj250
03-16-2007, 01:13 PM
ac wide grab bar is wat i ride it works great

shftmx300ex
11-21-2007, 01:25 PM
me and my friends weld our own, we find they work very well. and there free.

MX MaNiAc 06
11-22-2007, 05:50 PM
On my 450r i snapped the stock one off first time it hit the ground. So i got a Rath which was what i heard was the best. I put it down easy on the grass n did a cliffhanger wheelie. It bent!

bigj250ex
11-23-2007, 08:51 PM
my ac wide grab bar is good ive done 5th highchair scrapes and it doesnt break bend or anything even when i scrape in rocks and the good thing is when i do highspeed scrapes the quad doesnt tip over 2 the sides ot tumble like stock 1ns do