View Full Version : Well she blew! (pics)
MX450
01-01-2007, 06:14 PM
Motor blew this weekend, heres some pics of the carnage
MX450
01-01-2007, 06:15 PM
heres what it did to the piston, scarred it up on each side
MX450
01-01-2007, 06:16 PM
and the damage to the crank
MX450
01-01-2007, 06:16 PM
and here she sits:( currently for sale as a roller with everything but a motor
KFX400 RACER
01-01-2007, 06:27 PM
How much for the roller. Also does the blown motor come with it or no.
Were are you located by the way.
Thanks,
Jake
MX450
01-01-2007, 07:26 PM
4k for the roller, no motor
Full lonestar/axis, fullbore fenders, sparks pipe, comes with EVERYTHING you will need minus a motor
located near atlanta ga
312R1
01-01-2007, 07:40 PM
How much for the engine the way it sits right now?
C-LEIGH RACING
01-02-2007, 07:45 AM
Heres a few things I need you to do.
Turn that piece of skirt over & see if it has wear marks on it from touching the case.
Those hone marks in the cylinder bore, rub those & see how deep they are & are they realy straight not X shaped or is the pic fooling me.
Measure the piston & then the bore to see how much piston to cylinder clearance it has.
Never seen just the sleeve skirt break off by itself. Most times it happens from a busted piston skirt thrashing around & end up taking out the sleeve.
Has a piston ever busted any time before this.
The damage on the crank realy dont look that bad & you would think you could just smooth it out & run it, but, theres a lot you cant see, those tins have been distorted in that damaged area & probably have lost its seal somewhere around the edge & will start to breathe as the engine is running.
With the breathing come flex & then cracks & will come apart if you try to use is.
I can tell you first hand what an R engine ends up like when the tins come apart from a crank, you end up with all the parts under the clutch cover & the transmission to re-use in another engine build, that is if none of the case went into the transmission area & tore that up.
Hey, did you have this bike posted up for sale a few days ago.
Neil
MX450
01-02-2007, 08:40 AM
yea i had it up for sale, i may have a buyer for the entire thing
number5
01-02-2007, 11:04 AM
Mine cracked at the same spot.
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.