HRC Kit Valve Adjustment

[danniheyj82888]

I have checked my valves recently and they are just fine. But when I put on the hrc kit, am I going to have to reshim? I have a 06 450r.


THANKS

[CHEVYZ]

Keep in mind, all engines are different...but most of the time they should be fine. The HRC cam-at least the two I have installed thus far-seems to remain within tolerances. You should not have to make any adjustments, but there is always that chance. Just put it in and check it, it you do need shims then you can get them for reasonably cheap/easy.

[hy250r]

they are all different, honestly you wont know until you put it in and check the clearance, I had to reshim mine and it was about .002 off

[lumi]

im with chevyz on this one... the hrc cam is a drop in cam just to be safe double check those valves.. but they should be fine and ready to go..


good luck



-lumi