PDA

View Full Version : Urgent HRC kit timing/decompression?



SeanOO13
12-28-2006, 10:27 PM
wat one of the four timing marks do i use the one with the T right? and for the decompresion where do i put the cam to adjust it? any help at all little or big would be much apreciated thanks.

keller45
12-28-2006, 10:36 PM
for the decompression put the cam at TDC with chain. The lobes should be facing the back of the quad just slightly up.

THis could have helped:
http://www.rockinhorseweb.com/hrc_powerup_kit_install.htm

woodsrider4ever
12-30-2006, 07:14 PM
this is sean0013 friend thanks for the pics we had the timing 180 degreese off but now its runin liek a champ thanks alot man

lumi
12-30-2006, 07:59 PM
yup that is correct but the clearances and specs are for a 05 so dont use any clearances from there if ur running a 06 but all the other is the same. the cam lobes should be facing the rear and a bit up when at tdc..mark on the cam sprocket should aline with the arrow on the cam tower too.




-lumi