nomoreyami
12-15-2006, 04:30 PM
Black 94 Banshee for sale. Going to 4-stroke and I have no use for two quads, so I have to sell this bike. I bought it used, and in pretty bad shape about 6 months ago. Since then i have put alot of money into it. Some of the extras include:
Body
-All new black Maier plastics with racecut front fenders
-Alba Tribal graphics with gripper seat
Chassis
-Frame, swingarm, and steering stem PC'ed black
-All new Pivot Works bearings and seals throughout bike
-Modquad chain slider, guide, and roller kit
-Primary Drive X-ring chain and sprocket kit, stock gearing
-UM Performance swingarm skidplate
Suspension
-American star +2 +0 standard travel a-arms in gray vein with heim joints in the upper arms so caster and camber is adjustable-also heim tie rod end upgrade
-YFZ450 front shocks with compression and rebound adjustments
-Stock Ohlins adjustable rear shock
-YFZ450 front brake calipers with new EBC severe duty brake pads
-Dual front steel braided brake lines with billet clamps for arms
-EBC severe duty brake pads in rear caliper
-Rear steel braided brake line
-ProTaper ATV mid bend black
-Motion Pro Terminator clutch cable
-Sunline ARC CNC Axis clutch perch/lever(*note-pics don't show clutch lever, but I have put one on since)
-Hand polished front brake lever
-Cascade chrome rear brake lever
-Hand polished rear master cylinder
Engine
-New Wiseco Pro-Lite .040/65mm piston kit
-Cylinder jugs glass beaded to remove factory black paint
-EBC EP race clutch kit with kevlar plates
-Hand polished factory clutch cover
-Trinity Racing 2-into-1 carb conversion
-All new fuel and vent hoses
Exhaust
-FMF factory series, I think "fatty torque" they were on the bike when i bought it-the pipes are pretty tarnished and a bit rusted
-T.M. Designworks no leak exhaust collars
Wheels/Tires
Front:
-Douglas 7x10 .190 aluminum
-ITP Holeshot HD 22x7x10 (95% tread left)
Rear:
-Douglas 11x10 .190 aluminum
-ITP Holeshot 20x11x10 (50% tread left)
Also:
-Set of Pure Sports Realtor Dirt/Sand paddle tires 22x12x9(50% tread left), mounted on Douglas wheels
I'm sure theres more that I'm forgetting, but i think I covered most of it. The bike is very clean and cared for. I have only ridden it a few times since I put everything together. After every ride, the bike was washed, cables lubed, and chain waxed. I have also changed the oil twice, since the rebuild. I am looking to get $3500 OBO...send any questions or offers to Jinxproof20@yahoo.com. I'll get some pics up as soon as I figure out how to.
Body
-All new black Maier plastics with racecut front fenders
-Alba Tribal graphics with gripper seat
Chassis
-Frame, swingarm, and steering stem PC'ed black
-All new Pivot Works bearings and seals throughout bike
-Modquad chain slider, guide, and roller kit
-Primary Drive X-ring chain and sprocket kit, stock gearing
-UM Performance swingarm skidplate
Suspension
-American star +2 +0 standard travel a-arms in gray vein with heim joints in the upper arms so caster and camber is adjustable-also heim tie rod end upgrade
-YFZ450 front shocks with compression and rebound adjustments
-Stock Ohlins adjustable rear shock
-YFZ450 front brake calipers with new EBC severe duty brake pads
-Dual front steel braided brake lines with billet clamps for arms
-EBC severe duty brake pads in rear caliper
-Rear steel braided brake line
-ProTaper ATV mid bend black
-Motion Pro Terminator clutch cable
-Sunline ARC CNC Axis clutch perch/lever(*note-pics don't show clutch lever, but I have put one on since)
-Hand polished front brake lever
-Cascade chrome rear brake lever
-Hand polished rear master cylinder
Engine
-New Wiseco Pro-Lite .040/65mm piston kit
-Cylinder jugs glass beaded to remove factory black paint
-EBC EP race clutch kit with kevlar plates
-Hand polished factory clutch cover
-Trinity Racing 2-into-1 carb conversion
-All new fuel and vent hoses
Exhaust
-FMF factory series, I think "fatty torque" they were on the bike when i bought it-the pipes are pretty tarnished and a bit rusted
-T.M. Designworks no leak exhaust collars
Wheels/Tires
Front:
-Douglas 7x10 .190 aluminum
-ITP Holeshot HD 22x7x10 (95% tread left)
Rear:
-Douglas 11x10 .190 aluminum
-ITP Holeshot 20x11x10 (50% tread left)
Also:
-Set of Pure Sports Realtor Dirt/Sand paddle tires 22x12x9(50% tread left), mounted on Douglas wheels
I'm sure theres more that I'm forgetting, but i think I covered most of it. The bike is very clean and cared for. I have only ridden it a few times since I put everything together. After every ride, the bike was washed, cables lubed, and chain waxed. I have also changed the oil twice, since the rebuild. I am looking to get $3500 OBO...send any questions or offers to Jinxproof20@yahoo.com. I'll get some pics up as soon as I figure out how to.