PDA

View Full Version : 300EX Aftermarket Axle



oldfartracer
12-12-2006, 10:22 AM
Can someone tell me if an axle from a 400ex or a 250R will fit a 300EX. There are a lot more used aftermarket axles for these quads listed for sale than ones for a 300EX?

THANKS

markvette
12-12-2006, 02:06 PM
a 400 will fit but you have to make a spacer. on the lock nut side there is slack. i used an old bearing carrier bearing and grinded it to the right width.

Mark

Ryanwolfe911
12-13-2006, 11:00 AM
Or you can get a Rad locknut. They are much wider and can be turned down much farther to take up the slack, instead of making a spacer.

markvette
12-13-2006, 11:35 AM
i have a rad lock nut and still had to make a spacer.

Mark