PDA

View Full Version : raptor 660 mx setups


wishmasstir
12-11-2006, 11:59 AM
please post your mx setups, chassis wise, photos welcome!!!. i'm building a play mx style raptor for my buddy throughout this winter and was wondering what a-arms (brand/length), swingarm (brand/length) is the ideal setup.

i'm putting a durablue axle on it. this bike is short and tall so i'm thinking a +1.5" --> +2" swingarm. i'm not sure what the stock width is in the front, what would a set of +3's give me? +3+1's is what i was looking at. suspension will also be upgraded but he's keeping it standard travel.
ECATV Raptor
12-13-2006, 06:16 PM
I run mine both Mx and GNCC. Right now its set up for GNCC. For MX I run 18" holeshots on the rear and 21" on the front. It definitly holds its own on the MX track with the 450's. This is +2 +1 a arms. There plenty stirdy.
ECATV Raptor
12-13-2006, 06:20 PM
These are +3's. Plenty long:D
wishmasstir
12-14-2006, 05:55 AM
what offset rims do you have? can you measure how wide it is up front and back for me
ECATV Raptor
12-14-2006, 01:19 PM
3,2 offset. 3 on outside, 2 on inside.
ECATV Raptor
12-14-2006, 01:21 PM
Rears are 4+5 offset
wishmasstir
12-14-2006, 03:34 PM
are stock raptor rims 3/2 upfront also? i'm guessing that they are

can you measure it for me?

i can't believe your the only person chiming in on this ... nobody else on here has a mx raptor???????????:devil:
ECATV Raptor
12-14-2006, 04:42 PM
yes stock rims are 3+2
WildRaptor
12-18-2006, 05:14 PM
roll design doesn't make +3 arms for the raptor 660. they only make +2.5 and 1 up...... i know because i have them on my raptor660......
ECATV Raptor
12-20-2006, 12:58 PM
No they are +3's. I just emailed Roll design. They said they make +3's.
tater_kamik
12-21-2006, 05:03 PM
i have burgard standard arms, +2/+1 well i think they are forward 1" i cant remember anymore lol. +4 axle and a +2 swinger. that with standard offsets for the wheels works very well. i have works steelers with reservoirs and the setup is extremely good vs stock, though by far not top of the line, im happy. overall the setup it works very well for me with mx or trail. it also helpy keep the front on the ground with the longer swinger, and it sits a lot lower mainly because of 19" fronts and 18" rears. i cannot remember the width wight off hand, but i want to say somewhere near 50"??
WildRaptor
12-21-2006, 08:15 PM
OH THATS COOL **** WILL I LIKE MINE