jfwyatt
12-10-2006, 03:17 PM
Ive just finished getting my 416 back together . i used a wiseco 10 to 1 comp piston. and a stage 1 hotcams .After installing piston i put the stock cam back in and broke the rings in then i installed the hotcams stage1 . Now its time for break-in but im a little confused by the instructions the ones that came in the kit say to take a light ride for 20 min. then change oil and your done . But the ones i got off hotcams.com say 20min then cool down and the 40min . what method have some of you guys used. Im still i little skiddish as this is the first time ive rebuilt a fourstroke ive always had two strokes before. Thanks.