PDA

View Full Version : What have you broke


firefighterjosh
12-06-2006, 09:51 PM
Just courious...

What have you broken on your king quad prematurly(sp?)?

Like axles, tie rods, brakes ect
4trax250x81
12-07-2006, 07:14 PM
The only thing I have ever broke on my '05 was a fuse. I blew the fuse for the fan on the radiator causing me to overheat, once i figured out it was the fuse, problem solved. No other problems since. Once the copperhead vdi comes out, I will have no complaints with the KQ either.
firefighterjosh
12-10-2006, 07:23 PM
Originally posted by 4trax250x81
The only thing I have ever broke on my '05 was a fuse. I blew the fuse for the fan on the radiator causing me to overheat, once i figured out it was the fuse, problem solved. No other problems since. Once the copperhead vdi comes out, I will have no complaints with the KQ either.


Ya the VDI CDI is gonna be awesome. Too bad I can not run it in the National races:(
Maxxis96
02-20-2007, 05:38 AM
Has anyone ever had any prob with the drive sheaves going bad?
4trax250x81
02-20-2007, 10:07 AM
Originally posted by Maxxis96
Has anyone ever had any prob with the drive sheaves going bad?

Not yet (fingers crossed), although I still have stock tire size but have been in some pretty deep muck.
full mod. king
06-01-2007, 09:36 PM
5 front axles, 2 front output shafts stripped, 1 front output shaft broke in half and cracked the engine/transmission case.
firefighterjosh
06-03-2007, 07:23 PM
Originally posted by full mod. king
5 front axles, 2 front output shafts stripped, 1 front output shaft broke in half and cracked the engine/transmission case.

Is it a 05?
full mod. king
06-07-2007, 07:52 PM
Yes it is a 05
full mod. king
06-09-2007, 09:34 PM
I need to add 2 tie rods and 1 tie rod end, that was put on the list today.
4trax250x81
06-10-2007, 10:16 AM
Originally posted by full mod. king
I need to add 2 tie rods and 1 tie rod end, that was put on the list today.

Did you get the tie rod recall done to your King?
full mod. king
06-11-2007, 05:24 PM
Yes, i did the recall. I know what i did wrong. A couple of weekends ago i rolled my king over and when i began to ride again i noticed the tie rod was bent, so i loaded it up and went to the house. The next day i took it off and put it in a vice to straighten it and i got it pretty close, well it turns out that once you bend a tie rod it becomes very weak and i went riding sat. and it bent 4 times i would straighten it when it would bend but the 4 th time it was just to weak and it bent so bad that the ball joint in the tie rod end just let go.
firefighterjosh
06-11-2007, 05:58 PM
That would do it. My friend has done the same thing before