PDA

View Full Version : plastic help



trxenergy65
12-06-2006, 06:09 PM
i gotta 04 300 and the right side of the rear plastic where the little metal bar connects the plastic to the frame, the end of i plastic is busted just a little and th eplastic wont really stay on the frame. can anyone help me out

Sjorge450R
12-06-2006, 06:11 PM
if you are talking about little slits, thats normal. All 300ex do that. Especially with aftermarket plastic.

trxenergy65
12-07-2006, 03:06 PM
its the little plastic thing that hangs out from the read and i have stock plastic not aftermarket,

bwamos
12-08-2006, 05:41 AM
The small 1/4 diameter bent metal rod that connectus under the seat and supports the rear plastic, correct?

That thing is worthless.. always pops out of the holes its supposed to be in, then the fender flops around. Nothing you can really do about it, it's just the nature of the stockers, unfortunatly.

It's just the one side too.. the other side rarely pops out.


(or are you talking about the latch mechanism at the very back?

trxenergy65
12-08-2006, 12:47 PM
yea it the little thing thats hangs out not the latch and its only on the right side and it flops around alot and the other side in fine