400exrider707
11-27-2006, 06:57 PM
DOWN TO $2200 now!!!!
Good shape 2003 Zuk
New GEN II frame installed
all new set of stock a-arms
kenda klaw 18's on the rear
trail tech fat bars
cut front fenders
headlight removed
RAD tapered bearing carrier w/ caliper mount
FMF powercore slip on
wiseco piston .030 over
Pro design pro-flo kit
Dynojets
EBC clutch w/ stiffer springs
newer brake pads
heavy duty DID cam chain
New cam chain tensioner out of vinson 500 I think!?
Valves just adjusted
piston has less than 5 hours on it since the rebuild
also had all new valves put in and new seats cut.
Ill get some clean pics of it this weekend. Firm on price, but might consider trades + cash
Ok so I finally got pics here you go......I really need this thing to go as soon as possible. Cash talks!!!
NOTICE!!! It is perfectly fine to ride it the way it is, but it could use/needs a few things. First off seat cover is ripped but you can see that in the pics. No headlight, it was removed and then broke so never went back in. Plastic is pretty much hacked in the front, but it works and stays on, just a preference thing I guess. Also needs a rear brake line. You can pick up a stainless one on ebay for around $25. Bolts that hold the handlebar clamp are rusty. Handlebars are bent for sure, but this is from another machine. They were not bent on this machine. Dont ask me why someone put bent bars on here but hey... just letting you know. Also needs one bolt for the swingarm where it clamps down on the carrier. There are 3 in it now and hold it fine, but it is missing one. Also the biggest thing probably is this exhaust is in rough shape. The can itself has a crack right where the mounting strap goes. You could probably weld it or something, or just get a new one. This one was given to the previous owner for free. It works as it is, but I would definitely look at getting another. The couple things that are wrong with it are minor and someone could probably fix for under $100 easily. My buddy and I have no more time for this thing and it is taking up too much space. NEEDS TO GO!!!
Good shape 2003 Zuk
New GEN II frame installed
all new set of stock a-arms
kenda klaw 18's on the rear
trail tech fat bars
cut front fenders
headlight removed
RAD tapered bearing carrier w/ caliper mount
FMF powercore slip on
wiseco piston .030 over
Pro design pro-flo kit
Dynojets
EBC clutch w/ stiffer springs
newer brake pads
heavy duty DID cam chain
New cam chain tensioner out of vinson 500 I think!?
Valves just adjusted
piston has less than 5 hours on it since the rebuild
also had all new valves put in and new seats cut.
Ill get some clean pics of it this weekend. Firm on price, but might consider trades + cash
Ok so I finally got pics here you go......I really need this thing to go as soon as possible. Cash talks!!!
NOTICE!!! It is perfectly fine to ride it the way it is, but it could use/needs a few things. First off seat cover is ripped but you can see that in the pics. No headlight, it was removed and then broke so never went back in. Plastic is pretty much hacked in the front, but it works and stays on, just a preference thing I guess. Also needs a rear brake line. You can pick up a stainless one on ebay for around $25. Bolts that hold the handlebar clamp are rusty. Handlebars are bent for sure, but this is from another machine. They were not bent on this machine. Dont ask me why someone put bent bars on here but hey... just letting you know. Also needs one bolt for the swingarm where it clamps down on the carrier. There are 3 in it now and hold it fine, but it is missing one. Also the biggest thing probably is this exhaust is in rough shape. The can itself has a crack right where the mounting strap goes. You could probably weld it or something, or just get a new one. This one was given to the previous owner for free. It works as it is, but I would definitely look at getting another. The couple things that are wrong with it are minor and someone could probably fix for under $100 easily. My buddy and I have no more time for this thing and it is taking up too much space. NEEDS TO GO!!!