guggi102
11-27-2006, 08:27 AM
have finally decided to drop my 250r project and focus on one thing. So here are all the parts I have left. Prices DO NOT include shipping
1. Durablue +2 +4 axle with custom aluminum hubs that add another 1" on each side. Sprocket hub is also include, also made by durablue. Not bent and still has the chrome- sold
2. Works racing triple rate front shocks with rezzies set up for 180lb rider- 175.00
3. Silver race cut front and rear plastics. Has k&k atv graphics- pending
4. stocker swing arm polished looks like chrome. Polishing done right be a shop. Only did surfaces showing so not inside where linkage goes. Paid 80.00 for the polishing work - sold
5. JB racing TT swinger -3- 10.00
6. Front brake calipers in pretty good shape both for- 40.00
7. Rear brake caliper with e brake block of plate- pending
8. +2 steel braided front brake lines with stock length rear in good shape.-pending
9. 38mm mikuni flatslide carb in good shape-40.00
10. 86 front spindles with brake rotors and hubs- sold
11. Wire harness with coil and CDI in pretty good shape- pending
12. stock stem extended 1" straight and done by a shop with bar clamps-pending
13. Seat pan and foam with mounts- pending
14. Fuel tank with pet cock and mounts, red- sold
15. Front brake master cyl.- pending
16. Rear brake rotor with hub-5.00
17. Stock rear bearing carrier- pending
18. Pro Design kill switch, NEW- sold
19. RAD axle locknut- 20.00
20. Rear shock linkage- pending
Or sell all as a package for 675 plus shipping.
1. Durablue +2 +4 axle with custom aluminum hubs that add another 1" on each side. Sprocket hub is also include, also made by durablue. Not bent and still has the chrome- sold
2. Works racing triple rate front shocks with rezzies set up for 180lb rider- 175.00
3. Silver race cut front and rear plastics. Has k&k atv graphics- pending
4. stocker swing arm polished looks like chrome. Polishing done right be a shop. Only did surfaces showing so not inside where linkage goes. Paid 80.00 for the polishing work - sold
5. JB racing TT swinger -3- 10.00
6. Front brake calipers in pretty good shape both for- 40.00
7. Rear brake caliper with e brake block of plate- pending
8. +2 steel braided front brake lines with stock length rear in good shape.-pending
9. 38mm mikuni flatslide carb in good shape-40.00
10. 86 front spindles with brake rotors and hubs- sold
11. Wire harness with coil and CDI in pretty good shape- pending
12. stock stem extended 1" straight and done by a shop with bar clamps-pending
13. Seat pan and foam with mounts- pending
14. Fuel tank with pet cock and mounts, red- sold
15. Front brake master cyl.- pending
16. Rear brake rotor with hub-5.00
17. Stock rear bearing carrier- pending
18. Pro Design kill switch, NEW- sold
19. RAD axle locknut- 20.00
20. Rear shock linkage- pending
Or sell all as a package for 675 plus shipping.