View Full Version : theather
lt-r450forlife
11-27-2006, 12:11 AM
witch hot wire on the quad do i hook the teather to i know the ground goes to the frame or some sort of ground just need to know where the other or hot wire goes.
thanks,
dan
MXracer16
11-27-2006, 02:10 PM
Is it an normally open or closed type kill switch? If its open, you can't use it. If it were a Normally Closed switch you would take the Orange wire with the white stripe coming out of the blob on the handlebar, and trace that wire down into the plastic. Cut the wire, and then hook one end of the teather to one side and the other end to the other side. You then run the ground wire to any nut or bolt on the frame.
http://i49.photobucket.com/albums/f289/EricMaki/switch_gear_wires.jpg
Baracudaaa
11-27-2006, 04:51 PM
If its a Pro Armor or any other 'Open Style' you can use it. One wire from the teather spliced into the red and black wire coming out of your tip over switch, the other wire from your teather to ground. Thats what I did, works like a champ.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.