PDA

View Full Version : 22inch rears?



4bizzleEX
11-26-2006, 02:52 PM
I ride mainly desert, would a 22inch kenda klaw xc be stupid in the rear with the 22's i already have in the front? Would 22s be ok with a 14t front sproket or should i go with 20's? Any imput would be appreciated. Pics too if you got em

jeenyus_360
11-26-2006, 03:04 PM
i have 22 inch klaws in the back with my stock 22s in the front and a 14 tooth sprocket and it works great especially if you need the extra clearence it makes a big differance

hoodie
11-26-2006, 07:16 PM
I am thinking of doing the same thing here, but I'm going to go up to the 23 for the front tire. How is it running a 22 in the rear and a 22 in the front?

blown331
11-27-2006, 07:56 AM
I run 22's in the back everything else is stock... it pulls better on the top end... down low i noticed a slight decrease in power but I just rev it up a tad and go

ilpadrino113
11-27-2006, 08:44 AM
I'm runnin 22's in the back with the stock size in front. Runnin the 14T and it's fine. I mainly do it for all the mud around here tho, but it should be fine in sand.

firefighterjosh
11-28-2006, 12:42 AM
I always like running an inch bigger in the front

11-28-2006, 06:52 AM
I would go 23front 22 rear. When you run 22front and rear it makes it look bad. I ran 22" in the rear and it pulled pritty good. Not much differance in feal compaired to 20"

blasterandy
11-28-2006, 10:39 AM
Sounds fine the 23f 22r would look the best i think fronts should always be a little bigger on a sport atv utes should just stick with the same all the time. thats the quickest easyest way to gain clearence