450robot
11-26-2006, 11:48 AM
dont miss out on this deal, this ktm has under 2 hours of trail use. it hasnt been ran hard or crashed, actually, it has just finished it break in period, so its never hit full throttle yet
title and warrant in hand
extras:
-KTM/cycra pro-duro aluminum hangaurds
-magura steel braided line kit for the hydraulic clutch
-KTM official factory support bar pad (rare, it was only available at the factory support rig 2 years ago)
heres some general info on the bike
MANUFACTURER KTM
MODEL YEAR 2006
MODEL 200 XC
POWERTRAIN
ENGINE Single-cylinder, 2-stroke, liquid-cooled
DISPLACEMENT 193 cc
BORE X STROKE 2.52 x 2.36 in. (64 x 60 mm)
DRIVETRAIN
CARBURETION Keihin PWK 38 AG
IGNITION Kokusan digital 2K-3
TRANSMISSION 6-gears
CLUTCH Wet multi-disc, operated hydraulically
FINAL DRIVE 14:42
DIMENSIONS
FRAME Central double-cradle-type 25CrMo4
WHEELBASE 57.91 ± 0.39 in. (1,471 ± 10 mm)
SEAT HEIGHT 36.42 in. (925 mm)
GROUND CLEARANCE 15.35 in. (390 mm) unloaded
DRY WEIGHT 220.1 lbs. (99.8 kg)
FUEL CAPACITY 2.25 gal. (8.5 l)
BRAKES / WHEELS / TIRES
SUSPENSION Front: 1.89 in. (48 mm) WP USD; 11.81 in. (300 mm) travel
Rear: WP monoshock PDS; 13.19 in. (335 mm) travel
BRAKES Front: 10.24 in. (260 mm) disc
Rear: 8.66 in. (220 mm) disc
TIRES Front: 90/90-21 in.
Rear: 120/90-18 in.
I got this bike for $6200 otd, and im only asking $5200, may negotiate depending on if anyone grabs at this deal
title and warrant in hand
extras:
-KTM/cycra pro-duro aluminum hangaurds
-magura steel braided line kit for the hydraulic clutch
-KTM official factory support bar pad (rare, it was only available at the factory support rig 2 years ago)
heres some general info on the bike
MANUFACTURER KTM
MODEL YEAR 2006
MODEL 200 XC
POWERTRAIN
ENGINE Single-cylinder, 2-stroke, liquid-cooled
DISPLACEMENT 193 cc
BORE X STROKE 2.52 x 2.36 in. (64 x 60 mm)
DRIVETRAIN
CARBURETION Keihin PWK 38 AG
IGNITION Kokusan digital 2K-3
TRANSMISSION 6-gears
CLUTCH Wet multi-disc, operated hydraulically
FINAL DRIVE 14:42
DIMENSIONS
FRAME Central double-cradle-type 25CrMo4
WHEELBASE 57.91 ± 0.39 in. (1,471 ± 10 mm)
SEAT HEIGHT 36.42 in. (925 mm)
GROUND CLEARANCE 15.35 in. (390 mm) unloaded
DRY WEIGHT 220.1 lbs. (99.8 kg)
FUEL CAPACITY 2.25 gal. (8.5 l)
BRAKES / WHEELS / TIRES
SUSPENSION Front: 1.89 in. (48 mm) WP USD; 11.81 in. (300 mm) travel
Rear: WP monoshock PDS; 13.19 in. (335 mm) travel
BRAKES Front: 10.24 in. (260 mm) disc
Rear: 8.66 in. (220 mm) disc
TIRES Front: 90/90-21 in.
Rear: 120/90-18 in.
I got this bike for $6200 otd, and im only asking $5200, may negotiate depending on if anyone grabs at this deal