PDA

View Full Version : gearing/ cam troubles



lpmaster
11-25-2006, 06:02 PM
my dilema:

i Only Dune ride and i changed my sprocvkets to 13/36 with a stock motor

i then went with a 10:1 426 wiseco, stage 1 hotcam, 450r carb, jetted and pipe.....blah blah......i felt a huge power increase all the way through with this motor, 1st to fifth, i climbed the hills peaking 3rd at the top, i had no problem with stock 450s up the hill or at the drag strip......now i blew this motor by installing my circlips incorrectly so......


I now have a ross 11:1 440, stage 2 hotcam, 450r carb, everything else the same...blah blah.

anyways, i have dead on jetting only based off plug checks, and i dont ahve the power i used to up hill, or at the drags. 3rd gear starts running down as i peak the hill.

my main point for posting all this useless stuff, is to get some motor lists from you guys, preferably duners. on what motor set up your runngin, and possibly some tips to do to my motor, to get what i want, without going back to the 426 i had, i still have the satage 1, and im going to put it in to see if it changes everything.