blaster parts and raptor

[flint250trx]

i have a raptor head and a rev box out of an 01



i have a complete blaster part out. let me know what ya need. procircut pipes v force 3 reeds new in pkg dg grb bar

engine has a 3mm stroker crank 40 over bore and i had a 10th shaved off the head. it needs a new piston and rings. also the base needs to be cleaned out. all the seals were rplaced and have about 5hrs on them.

ahve crome rims they are a factory style just crome.

and everythgin else is stock but in good shape.

frame was broke and welded whear the grab bar mounts on then sand blasted then painted dark blue then clear coted

feel free to email me polariseater660@hotmail.com or call my cell 315-244-2611

josh

[NOS_350x]

I need a blaster stator coil, posibly the whole electrial system if the price is right.

[flint250trx]

u have a pm on the electrical.


i also just found a flywheel and a 686 piston for a raptor just needs some new rings. rims seat reeds exhaust are sold.


thanks again

josh

[Jon114xxx]

procircut pipes v force 3 reeds new in pkg dg grb bar





How much for all 3 and for shipping to about Frederick MD? Very interested!!!

[blasterheavyB]

how much for the rims and is it all four of them

[flint250trx]

rims have been sold

[gwsjr]

Josh,

Got the CDI you sent me and it fired the raptor right up. Appreciate your help with this and the prompt shipping.

[z400guy21]

pm me a price of the rear brake setup without the caliper and the exhaust and the grab bar (separate prices please)

thanks

[200xer]

HOW MUCH FOR THE 686 PISTON?

[200xer]

HOW MUCH FOR THE 686 PISTON?
AND WHAT RATIO IS IT.
IM THINKING ABOUT PUTING IT IN MY 660 GRIZZ

[noreversesucks]

How much for the Raptor head.
Also might be interested in the 686 piston if 200xer doesn't want it.

[quaddad#123]

Do you have rear hydraulic blaster brakes?
If so how much?

[flint250trx]

the head ill let go for 150 bucks. i know i could get alot more out of it but its the holidays and im just looking for some extra cash. the piton cost me 180 and its 11 to 1ratio. make one hell of an improvment ill let it go for 50 bucks.

i dont have any blaster breakes. all i mainly have left is a frame swinger axel all shocks electrical front end and the engine. pipe and reeds are gone. other than that make me offers.


i also have a new in the pkg dg rear grab bar for a blaster too.


thanks again

josh

315)-244-2611

[noreversesucks]

Can ya send some pics of the head and piston?
ttbaker@nemr.net

Does the rocker cover come with the head?

Wiseco piston or JE? Or another brand?

[racinmason911]

what do you want for everything you've got from the swingarm back?

[rjslape]

What do you want for the blaster engine?

[flint250trx]

blaster engine axel,carrier and hubs i traded for a bunch of 250r parts. i will sell the swing arm for 65 pluss shipping and the head and the piston i will let go really sheap too. 150 for both.

let me know what ya want sorry it took me so long to get back to you guys i was gone all week again


josh

[lurch241]

how much for the kick start shaft complete

[Jon114xxx]

How much for the rear grab bar shipped to 21757?

[janderson]

is the raptor head still for sale?
if so pm me thanks

[jim_beam_racer]

how much do u want for the motor can u send pics to wheelin_boy@hotmail.com