more questions, about 300ex parts

[cody_119]

ok so, im building a project 300ex right... and i was needing to know what swingarms are interchangable. im going to go with 250r +1 a arms, so it'll be a plus 3 in three in the front, and i dont know what ill do for the rear end. maybe either a 250r, 400ex, or a 450r swingarm.

[2muchquad]

You can go with either a 350x swinger,250r ,450r or 400ex swinger in back.I had a 250r (89 swinger) setup a few years back,a 350x set up last year and currently i run the 450r setup.Just weld a tab on the frame for the linkage and your good to go.It'll be easier to use the complete rearend from whatever you get as far as the brake caliper mounting goes etc but its NOT mandatory as the 300ex caliper can be made to work.you'll need the axle too;)

[cody_119]

i have a durablue +2/+4 axle for a 250r, and im going to buy either a 250r or a 400ex swinger. i kinda like the looks of a 400ex, so thats what ill buy, the drive line lines up right?