PDA

View Full Version : 250X/300EX BIIIG bore 335X/380EX


250X_project
11-17-2006, 08:39 PM
I need to find people to buy 2 Brand NEW Big bore kits, and also a used one (20hrs).....I have found a deal on these, but must buy 4. I will use one and save another for later..

New kits include-Piston, rings, pin, clips, and sleeve.

used kit-piston, rings, pin, clips, and jug with sleeve in it.-get an extra jug, do not have to pay for re-sleeving.

This kit would give you a 333cc 250X or 380cc 300EX, with the stock stroke. works on either machine.

anyone interested?

Piston's are JE and sleeve is Wiseco
200xer
11-17-2006, 11:31 PM
KINDA:D
HOW MUCH?
Wicked450r
11-18-2006, 05:13 AM
post some prices
250X_project
11-18-2006, 08:14 PM
First keep in mind...
1.)stock-260X/297EX Wiseco is $110,

2.) 288X/330EX Powroll are $315,

3.) to get a 335X from Powroll you would need the stroker crank -$315 and the 78mm Big bore -$315 a total of $630.

4.) Or for the EX-stroker-$290, and 80mm big bore-$315, total of $605 and still only have a 352EX.....yet the stroker cranks are said to give an engine slower revving.

5.) And for the 380 kit from FST it will be $745

Now with this said I will be asking $350 for the entire kit new-This includes re-sleeving your jug.

And $200 for the used kit. Tell me what you all think.
honda965
11-19-2006, 06:41 PM
im interested in the 380 kit, ur sayin it'll be 350$?
Wicked450r
11-20-2006, 05:01 AM
I may want in on this for a 300ex
250X_project
11-20-2006, 06:35 AM
honda965- Yup $350, with the machining done to your jug.

Wicked450r - Okay, good to know. Now if one other person wants a NEW kit, and one wants a used than I will buy them.
honda965
11-20-2006, 08:41 AM
what you mean done to my jug
250X_project
11-20-2006, 09:31 AM
If you choose, You can send me your cylinder jug and I will have it re-sleeved with the big bore sleeve for no extra charge, or I will just send you the kit.
honda965
11-20-2006, 03:35 PM
whats needed for the kit? wat do i have 2 do? like do i have to drill something or what
250X_project
11-20-2006, 04:08 PM
When you get your cylinder back from me you need nothing except a little case work. As any kit I have found bigger than a 78mm bore (275X/313EX) needs a bit of case machining to except the bigger sleeve. After this it will all bolt up. Thanks!

-Adam