amsoil or klotz

[christophere251]

whats ur fav? why? what ratio do u use?

[wykyd z400]

Klotz....Both are good tho. Ya just cant beat the sweet smell of klotz!! :D

[TANNER250r]

amsoil 40.1 i have never used klotz but i here those to are the best dose any one know where to get the gallon jugs on line

[Aceman]

Klotz R50 40:1 and I buy all of it from Rocky Mtn.

[86 Quad R]

i've run klotz in all my 2 strokes for years. it's a very good oil and it smells good to boot lol. if your running anything other than pump gas i would reccomend the kl-100 versus the r-50. its formulated for any type race fuel, including methonol<sp

[spent21]

i've run Amsoil 40:1 since my first rebuild and have never looked back. before then was Maxima

where are you from 86 Quad R?
i grew up in central MS.

[86 Quad R]

i'm in crystal springs. about 20 mins south of jackson. where'd you grow up?

[TWILES]

Maxima Castor 927 32.1 250R and LT500R
Yamalube 2R 32.1 Banshee

Klotz didn't burn off very good and Amsoil senthetic seemed like it wasn't keeping the motor cool enough.

[Creech52]

Ive used 2R and Klots super tech in my banshee with no problems both mixed at 32:1, I have also used some other things in a pinch (lawn mower premix and lucas premix) and they both seemed to gum things up and foul my plugs. I plan on sticking with my Klotz super tech for the R once its done but may use another type of Klotz. Also not sure what ratio yet.

[86 Quad R]

pick a oil type and ratio, then jet accordingly. :D

[spent21]

i know the place! i grew up in Kosciusko, about an hour North of Jackson. we used to hang out at The Dock, and Shuckers all the time. The Forum was just a bit too preppy for me.

where do you ride? we used to put in on the river close to downtown jackson @ silas brown bridge, but they've changed all of that with guard rails and such that you can't get down there. i put in once on 80 at the scrap place, but the owner came out and told us not to come back. :ermm: they used to let people run quads on practice days at pearl, but they shut that down. i've run down at Fernwood a couple of times. that's a cool track. i hear kevin windham has a kick *** place down around columbia somewhere, but i've never been there.

[86 Quad R]

yea!!! i rode at silas brown religously when i first got my quad, up until they shut it down. we mainly ride old cut overs, the CREEKS :devil: and sand pits. we from time to time even go to the 300' dirt drag strips in la and in montecello<sp now that i have me a few acres we ride at my house some.

you ride mx? there is a plush mx practice/race track across the woods on an adacent road from where i live. i love to listen to them while working on atv's in my shop. :D

[beerock]

amsoil is the best. i run it at 50:1 i ran a 265 in glamis for 9 1/2 days straight 8 hours a day, WOT on 109 octane and it blew halfway through the last day.. 80+ hours on a top end at wot is very commendable..

amsoil all the way

[deathman53]

I used to use klotz r50 in my bikes, but clogged powervalves made me switch to klotz synthetic snowmobile oil. I am notice the bike smokes less with it. A friend of mine needed gas for his bike, I gave him my jug, 114 leaded race gas w/ 32:1 klotz snowmobile oil, he said his bike smoked for the first few minutes, then cleaned up and it runs better than ever now. He switched to the snowmobile oil.

[86 Quad R]

educate me. i know nothing about sno-mo's. are they oil injected or what? or are the premix ya fuel -n- gas and fuel injected? :confused:

[deathman53]

I don't know for sure, but I do know that snowmobiles have powervalves stock. My goal was a good oil that won't clog my powervalve and reduced smoking. It seamed to do the trick.

[spent21]

I got out of mx a few years back when i messed up my shoulder. i came to realize that i don't bounce as high as i used to. i was wanting to set my R up for some TT racing, but i haven't been able to find anything close to Nashville, so now i'm thinking about getting into the XC series. i can't decide between the 400 and the R. the 400 would probably need less work to make it competative since i'd have to have all new A-arms/shocks for the 250.

[ChvyCruzen]

I run Klotz SuperTechniplate at 40:1. I haven't owned the machines long enough to see how well that works out. I used to run AMS at 50:1 but I favor the smell of Klotz :D

I ride mostly trails and I hit it WOT a lot.

[707trx250r]

You can't go wrong with redline at 40-1,with vp c-12. That is a great smell.
later
adam

[400EX QUADER]

Anybody like Torco gp-7??? I run it 40:1 and love it.

[kiesta00]

I use royal purple mixed at 36:1 and can't complain...never foul plugs and doesn't smoke bad.

[Creech52]

Well it looks to me like theres alot of good oils out there you guys and gals are running, so its pretty much personal prefernce. I wouldnt suggest a straight castor oil as they are known to gum up top ends, but 927 does smell yummy.

[93_5.0]

I always use klotz, 32:1

I love its smell :D

[bradley300]

i ran a bunch of different oils in my blaster. when you talk about oils, and have amsoil in the mix, there is only need to mention two others. motul and redline. those 3 oils or head and shoulders above all the others IMO

[KFX400 RACER]

I have always used Golden Spectro two stroke oil in my mx bike and 250R. I have had no problems with the oil at all.

I have also tried once or twice the PJ1 two stroke oil and it was good also.

I just decided to stay with golden spectro. Its been the best for me.

The honda I mix five gallons of gas to one of the little bottles or sometimes either three or four gallons of gas to one of the bottles.