gizmocor
11-14-2006, 04:04 PM
I have some stuff left from the old 250R days I want to get rid of.
I will post some picts shortly. All prices are shipped to your door (only ship to the continental US). Also have some misc odds and ends that I will add to this post as soon as I sort through them.
250R rear brake system (complete with master cylinder, resivoir,pedal and caliper.....just no brake line)..........$135
250R '86-'87 hoods. Have 2 stock Honda, one blue, and one red, and 1 maier blue hood. (all flat, no headlight) Will take $20 for one, or $40 for all three. Mounting hardware not included.
http://www.imagestation.com/picture/sraid218/pa9b8ce731fa649a2b95391deb0fa8c25/ec07c456.jpg
Maier Front fender assy. Complete with both left and right fenders as well as center hood. All plastic is old non-gloss style and is white in color. Plastic is in very good shape, just needs a few brackets...............$75
http://www.imagestation.com/picture/sraid218/pa4c90aa56f10901d234e22b0490145b3/ec07c35c.jpg
RPM dominator axle with HD race hub.......$285
Stock '88 cylinder. I believe it's on it's last bore unless you run the spacer plate and use the '86-'87 piston. Stock porting.......$35
http://www.imagestation.com/picture/sraid218/p812f320c5d7e24883215b8cc11b54ec4/ec07c7ef.jpg
http://www.imagestation.com/picture/sraid218/pded6f573059884a9ead6e26ef076cb5d/ec07c757.jpg http://www.imagestation.com/picture/sraid218/p27c882e3928bceef24ac0476ee6b813c/ec07c6cf.jpg
Intake boot from an '88-89. $20
Chromed stock water pump cover. I ran this on my R but the chromer didn't do I great job of covering the sealing surface so it requires a little silicone to seal the gasket...........$15
Durablue Adjustable dogbone.......$20.........SOLD!
250R stock thumb throttle........$20
Stock Rear shock. Revalved and Resprung for 180lb XC......$100
http://www.imagestation.com/picture/sraid181/pe706dbdcbb70ebe3eb386d6af6339287/f2cd0ba6.jpg
'88 Steering Knuckles with spindles (Lt and Rt).........$40
Durablue rear Hubs (and I'll through in a set of stock hubs I had laying around. I think I replaced them because I couldn't keep the stock hubs tight).........$30 for all 4
Stock 88 Footpegs.......$25
Stock 88 A-arms. All with new Helm Enterprise bushings. Good condition........$95
PM or post is fine to get in touch with me.
Thanks
Cory
I will post some picts shortly. All prices are shipped to your door (only ship to the continental US). Also have some misc odds and ends that I will add to this post as soon as I sort through them.
250R rear brake system (complete with master cylinder, resivoir,pedal and caliper.....just no brake line)..........$135
250R '86-'87 hoods. Have 2 stock Honda, one blue, and one red, and 1 maier blue hood. (all flat, no headlight) Will take $20 for one, or $40 for all three. Mounting hardware not included.
http://www.imagestation.com/picture/sraid218/pa9b8ce731fa649a2b95391deb0fa8c25/ec07c456.jpg
Maier Front fender assy. Complete with both left and right fenders as well as center hood. All plastic is old non-gloss style and is white in color. Plastic is in very good shape, just needs a few brackets...............$75
http://www.imagestation.com/picture/sraid218/pa4c90aa56f10901d234e22b0490145b3/ec07c35c.jpg
RPM dominator axle with HD race hub.......$285
Stock '88 cylinder. I believe it's on it's last bore unless you run the spacer plate and use the '86-'87 piston. Stock porting.......$35
http://www.imagestation.com/picture/sraid218/p812f320c5d7e24883215b8cc11b54ec4/ec07c7ef.jpg
http://www.imagestation.com/picture/sraid218/pded6f573059884a9ead6e26ef076cb5d/ec07c757.jpg http://www.imagestation.com/picture/sraid218/p27c882e3928bceef24ac0476ee6b813c/ec07c6cf.jpg
Intake boot from an '88-89. $20
Chromed stock water pump cover. I ran this on my R but the chromer didn't do I great job of covering the sealing surface so it requires a little silicone to seal the gasket...........$15
Durablue Adjustable dogbone.......$20.........SOLD!
250R stock thumb throttle........$20
Stock Rear shock. Revalved and Resprung for 180lb XC......$100
http://www.imagestation.com/picture/sraid181/pe706dbdcbb70ebe3eb386d6af6339287/f2cd0ba6.jpg
'88 Steering Knuckles with spindles (Lt and Rt).........$40
Durablue rear Hubs (and I'll through in a set of stock hubs I had laying around. I think I replaced them because I couldn't keep the stock hubs tight).........$30 for all 4
Stock 88 Footpegs.......$25
Stock 88 A-arms. All with new Helm Enterprise bushings. Good condition........$95
PM or post is fine to get in touch with me.
Thanks
Cory