PDA

View Full Version : Air Fuel Mixture Screw


Ride450Red
11-13-2006, 08:11 PM
Do I have to buy a tool to adjust it? I cant even figure out how to do it.
400exrider707
11-13-2006, 09:29 PM
Your fuel screw is located on the bottom of the carb. Just a screwdriver. A really short screwdriver.
DirtDevilBT
11-13-2006, 09:46 PM
or a thumb adjustable screw from Ebay or CD Racing maybe
GPracer2500
11-13-2006, 09:49 PM
This thread might help: http://www.exriders.com/vbb/showthread.php?s=&threadid=229923

Your stock 06' screw might have a "D" shaped head instead of a normal slotted screw driver head.
Ride450Red
11-13-2006, 10:31 PM
Originally posted by GPracer2500
This thread might help: http://www.exriders.com/vbb/showthread.php?s=&threadid=229923

Your stock 06' screw might have a "D" shaped head instead of a normal slotted screw driver head.

Thanks man that did help. Im going to look into buying one. I rejetted my carb, but need to adjust the a/f for fine tuning.
QuadRacer041
11-19-2006, 03:44 AM
Originally posted by 400exrider707
Your fuel screw is located on the bottom of the carb. Just a screwdriver. A really short screwdriver.


he has a 06, you CANT use a screw driver, you need a special tool.


what i did was buy one of the quick adjust screws. to install it you need to remove the bowl from the carb then use a pliers to inscrew the stock one.
hemp450r
11-19-2006, 09:44 AM
'06 trx 450r has a 'd' shaped mix screw n the bottom of the carb, you get the tool with a jetting kit, around 50$ , or you could build one with a piece of 5/16" cold roll and a bench grinder