top speed???

[christophere251]

if i changed my sprockets from stock to 14/36 what kind of topspeed should i expect??

[oldsking86]

I personally know my bike with a 14 upfront gives me a speed over 90mph. Thats on my ATC with just a pipe and silencer

[250r4life]

Originally posted by christophere251
if i changed my sprockets from stock to 14/36 what kind of topspeed should i expect??

depends on A- what tires you are runing
B- if your bike can pull that gearing- thats pretty high
C- what positon you have your wheelie sensor put on ;)

[TANNER250r]

can i get that part number for the wheelie sensor & is it the same for all years



























:devil:

[BLACKeR]

with that gearing you can expect to go at least 100 kph

[christophere251]

whats the wheelie sensor??? Ive never heard of one!

[TANNER250r]

its just a joke form another thread

[86 Quad R]

go HERE (http://www.angelfire.com/pa5/cannondale/88_89trx.html) :D

[C-LEIGH RACING]

With 15/33 gearing & 18" tires, around 120 mph, better be sure the tires are balanced though.

Sensor,,:o :o :o :D :p :p thats a good one.
Neil

[4fifty]

you guys are outta you f-ing minds. 15 is a big f/s and 33 is small. 120 mph? maybe on NOS. or alcohol. 85 or so unless you got quite a bit of mods. i know gearing changes it. and at that gearing you would go faster but not that fast. especially not with 18s. that tire would take so many revolutions to go that fast. keep fantisizing.

[atvmxr]

ahh, finally a four poke rider to set us straight! :rolleyes:

[86 Quad R]

that there is some funny chit. i 'ont keer who you are. :D

[C-LEIGH RACING]

Originally posted by 4fifty
you guys are outta you f-ing minds. 15 is a big f/s and 33 is small. 120 mph? maybe on NOS. or alcohol. 85 or so unless you got quite a bit of mods. i know gearing changes it. and at that gearing you would go faster but not that fast. especially not with 18s. that tire would take so many revolutions to go that fast. keep fantisizing.

I guess if you dont know, you just dont know, :D :D :D

I can see where riding a 4 stroke, it would make you think a 4 wheeler couldnt go that fast, but surprize surprize.

My blaster engines I build, pull a 16/38 gear, if it dont, we got rider problems.
Neil

my banshee pulls a 16/40 just fine

[C-LEIGH RACING]

Originally posted by Honda86
my banshee pulls a 16/40 just fine

Some of the big motor banshee drag boys are running 20 & 21s on the front, modded of course.
Neil

[deathman53]

my 86 atc250r can pull 14/38 on 18" tires with no question about it, I am putting tri-moly sidewinder 14/36 sprockets on it. Look at the long list of mods for it. I always used 14/39 on woods 250r's too. Another 250r I just built uses 14/38 sidewinders, I am considering going to a 36 on that one too. I have a 86 200x that pulls 14/36(one up in front and 2 down in back) on 18" tires and can pull a holeshot no question about in 2nd and can pul 3rd gear starts also. Its all about how/who the motor was built. I had a friend that built 240 blaster that would give most 400ex's, 300ex's, 250r's, banchees, etc a real good run for there money and he won about 1/2-3/4 of the time. there was a guy at a local track that had a sparks cylinder(almost stock bore) on his bike, sparks pipe, 38 a/s, cr250 intake and reeds and advanced timing, his bike would pull 15/36 very easily. You 4 poke guys just don't know what a good modded 2 stroke motor can do.

[beerock]

Originally posted by 4fifty
you guys are outta you f-ing minds. 15 is a big f/s and 33 is small. 120 mph? maybe on NOS. or alcohol. 85 or so unless you got quite a bit of mods. i know gearing changes it. and at that gearing you would go faster but not that fast. especially not with 18s. that tire would take so many revolutions to go that fast. keep fantisizing.

haha its funny, cuz hes repremanding neil for thinking a 2 stroke could do it , just makes it funnier

***** if you port a 265 right it will pull 15 35

neil QUICK get the NAAWWSSSS so we can show em it will hit 145..... ;)

[matt250r21]

My 265 pulls 14/36 with 18s easy. Mabey I should try a 15 up front. Where do these 4 stroke guys come from?

[beerock]

Originally posted by matt250r21
My 265 pulls 14/36 with 18s easy. Mabey I should try a 15 up front. Where do these 4 stroke guys come from?

from a vagina :p :D

[matt250r21]

Mabey I should have said what are these 4 stroke guys thinking.

[beerock]

Originally posted by matt250r21
Mabey I should have said what are these 4 stroke guys thinking. :p either way there still umm hmmm???:p
































j/k

[C-LEIGH RACING]

Deathman,
Those 4 stroke guys do know, why you thing they are trying to justify that 6000.00 to 15000.00 they are spending on that 4 stroke trying to make it run.

If I spent that much just to get a engine to realy run like it needs to & then it blow up like the 4 strokes are doing, I would be degrading the 2 strokes myself.


B,
dont need no gas or hair dryer to make them run, when that pipe & port match up,,,,move over & let the BIG DOGS EAT.
Neil

[TheIceMan]

Originally posted by C-LEIGH RACING




dont need no gas or hair dryer to make them run, when that pipe & port match up,,,,move over & let the BIG DOGS EAT.
Neil

hehe..yeah what he said ;) my 295 PV easily pulls 15/36 with 20's or 18's on it. Might have to hunt down my 34 tooth rear,slap on some 20" Hoosiers,dust off the leathers, and visit the 'strip this spring .:devil:
Neil,hope you and yours had a good turkey day.

[C-LEIGH RACING]

It was right nice, family comming in & enjoying everything, I got way more stuffed than the turkey did, in recovery right now though.

How about at your house.
Neil

[TheIceMan]

Originally posted by C-LEIGH RACING
It was right nice, family comming in & enjoying everything, I got way more stuffed than the turkey did, in recovery right now though.

How about at your house.
Neil

You too eh? so much turkey,so little time.
Happy Holidays