clutch cable adjustment

[jro09]

I installed an asv clutch lever, but it left a bunch of slack on the cable. i adjusted the cable on the right side of the motor but i cant figure out how to know when it is perfectly adjusted. And i cant tell if it is still slipping at WOT. is there an easy way to adjust it, and know that its right?

[dariusld]

If there is slack you won't be disengaging the clutch all the way. If its tight, then it will be slipping. When I installed both my cr250 levers, I had to adjust them all the way out to get rid of the slack. Adjust the cable at the lever and at the engine case.

[Kaleigh]

ok.. screw out the adjuster on the hand lever a lil bit.. maybe a 1/8 inch or a lil more.. now go to your engine side and adjust the cable there.. pull it as far through as you can without putting a lot of force into it.. now go back to you hand lever and turn the adjuster in till you have 1/4 inch freeplay in the lever..