TRX_350XX_rider
09-11-2002, 10:23 AM
350X clutch update:
Someone here mentioned having too much oil may cause clutch slippage... first I've ever heard of it, but that wasn't the fix, nor did it have any effect... but I learn something new everyday...
:(
My idea is this. Disassemble, take each fiber plate out and lightly sand them with 220grit sandpaper to give some texture to the fiber so that it'll create some friction/traction on pressure plate.
Does this sound ok?:confused:
What would you do if your clutch slipped? *I know I'll end up getting a new clutch, but what other option would be near last resort?*
Thanks for your help...
Someone here mentioned having too much oil may cause clutch slippage... first I've ever heard of it, but that wasn't the fix, nor did it have any effect... but I learn something new everyday...
:(
My idea is this. Disassemble, take each fiber plate out and lightly sand them with 220grit sandpaper to give some texture to the fiber so that it'll create some friction/traction on pressure plate.
Does this sound ok?:confused:
What would you do if your clutch slipped? *I know I'll end up getting a new clutch, but what other option would be near last resort?*
Thanks for your help...