Blaster Hybrid /trying to fit a radiator

[QuadJunkies]

We are wanting to upgrade to a larger radiator on my Daughters Blaster/CR85. We have two dif. radiators one is a YFZ450 and one dual out of a 250r trike ( I think thats what it is) according t o Hetricks, the YFZ should fit, thats what they use..Well... I dont see how ? LOL:confused:

Anyone seen this done before?
Were doing afull tear down and changing a few things on it thiswk end.

[Rootar]

post some pics and maybe we can help better

[QuadJunkies]

What would you like pics of and Ill do my best.. :)
Do you want pics of the frame and Radiator?

[zorg]

I put the 250r radiator in my sons blaster frame. It just fit! I don't know about the 450 one.

[QuadJunkies]

MY guess is oing to be the type of pipe that was custom built for it .
I know some wrap around the outside ,some the inside.My guess is that it wont fit because of the angle of ours... :confused:
Janssen reccomends a Cobra radiator, I wont pay what Cobra is charging,plus Im not convinced its big enough anyways.....:scary:
Heres a few pics

[QuadJunkies]

.

[QuadJunkies]

that^^ bracket is in a bad spot for fiting anything in there.

[QuadJunkies]

..

[QuadJunkies]

had we custom build the pipe we would have wentwith onethat would allow the radiator to fit better,not all to the leftside

[QuadJunkies]

I had a hard time getting the camera to fit where I wanted it to take the pics so this was the best I could get .

[QuadJunkies]

I cant think of anything else but the 250 trike radiator maybe working..???.:confused:

I dont think the YZF will fit :(

[QuadJunkies]

.

[QuadJunkies]

any suggestions ?

[markvette]

what about one radiator off a yz 426 dirt bike. they have 2 that are tied together. they are not wide but tall. probably have to take to a radiator shop and have something done with the inlet and outlet. just an idea.

Mark

[zorg]

After work i'll take a picture of mine and post. PM me with your e-mail i'll send alot of pictures with the 250r radiator and pipe.

[QuadJunkies]

well, they got the radiator fitted... Ill get some pics up soon.
Now next will be modifying the pipe to fit around it . We have someone locally that can do that.

Next will be fabbing a skid plate.

[Laeger350RX]

I have never put a radiator on a blaster but I have built many hybrids...anyways, maybe you should try a lt250R radiator or a banshee one and mount it in a similar fashion as found on those atvs. If your pipe was in a different spot a trx 250R radiator would work well. Just some suggestions for radiators that you may not have considered.

[QuadJunkies]

We already got the radiator problem solved:) Its already got tabs and mounted and is now on it. The YFZ450 worked, we just have to relocate the upper mounting tab and adjust and fit the mid pipe section.

[QuadJunkies]

Got the pipe angled to fit today as well. Heres a couple pics with it fitted before it all comes apart to get cleaned up and fresh PC.

[QuadJunkies]

.

[QuadJunkies]

..